#endif
/* Serial & console */
-#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
/* ns16550 reg in the low bits of cpu reg */
#define CONFIG_SYS_NS16550_CLK 24000000
-#ifdef CONFIG_DM_SERIAL
-# define CONFIG_DW_SERIAL
-#else
+#ifndef CONFIG_DM_SERIAL
# define CONFIG_SYS_NS16550_REG_SIZE -4
# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
/* CPU */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_TIMER_CLK_FREQ 24000000
/*
* The DRAM Base differs between some models. We cannot use macros for the
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */
#define CONFIG_SYS_TEXT_BASE 0x2a000000
#define CONFIG_PRE_CON_BUF_ADDR 0x2f000000
-#define CONFIG_SYS_SPL_MALLOC_START 0x2ff00000
+/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
+ * since it needs to fit in with the other values. By also #defining it
+ * we get warnings if the Kconfig value mismatches. */
+#define CONFIG_SPL_STACK_R_ADDR 0x2fe00000
#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000
#else
#define SDRAM_OFFSET(x) 0x4##x
#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
#define CONFIG_SYS_TEXT_BASE 0x4a000000
#define CONFIG_PRE_CON_BUF_ADDR 0x4f000000
-#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000
+/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
+ * since it needs to fit in with the other values. By also #defining it
+ * we get warnings if the Kconfig value mismatches. */
+#define CONFIG_SPL_STACK_R_ADDR 0x4fe00000
#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000
#endif
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */
-#ifdef CONFIG_MACH_SUN9I
+#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
/*
* The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
* slightly bigger. Note that it is possible to map the first 32 KiB of the
* the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x10000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x0a000 /* 40 KiB */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */
#else
#define CONFIG_SYS_INIT_RAM_ADDR 0x0
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
#endif
/* mmc config */
-#if !defined(CONFIG_UART0_PORT_F)
-#define CONFIG_MMC
+#ifdef CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_MMC
#define CONFIG_MMC_SUNXI
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_GENERIC_BOARD
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
#define CONFIG_IDENT_STRING " Allwinner Technology"
+#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
#define CONFIG_SPL_BOARD_LOAD_IMAGE
+#if defined(CONFIG_MACH_SUN9I)
+#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */
+#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* ? KiB on sun9i */
+#elif defined(CONFIG_MACH_SUN50I)
+#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */
+#define CONFIG_SPL_MAX_SIZE 0x7fe0 /* 32 KiB on sun50i */
+#else
#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */
+#endif
#define CONFIG_SPL_LIBDISK_SUPPORT
-#if !defined(CONFIG_UART0_PORT_F)
+#ifdef CONFIG_MMC
#define CONFIG_SPL_MMC_SUPPORT
#endif
+#ifndef CONFIG_ARM64
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
+#endif
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
+#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
+/* FIXME: 40 KiB instead of 32 KiB ? */
+#define LOW_LEVEL_SRAM_STACK 0x00018000
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+#else
/* end of 32 KiB in sram */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+#endif
/* I2C */
-#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
+ defined CONFIG_SY8106A_POWER
#define CONFIG_SPL_I2C_SUPPORT
#endif
#if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
- defined CONFIG_I2C4_ENABLE
+ defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_SYS_I2C_SPEED 400000
#endif
/* PMU */
-#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
+ defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
+ defined CONFIG_SY8106A_POWER
#define CONFIG_SPL_POWER_SUPPORT
#endif
/* GPIO */
#define CONFIG_SUNXI_GPIO
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_CMD_GPIO
#ifdef CONFIG_VIDEO
/*
/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
#define CONFIG_VGA_AS_SINGLE_DEVICE
-/* To be able to hook simplefb into dt */
-#ifdef CONFIG_VIDEO_DT_SIMPLEFB
-#define CONFIG_OF_BOARD_SETUP
-#endif
-
#endif /* CONFIG_VIDEO */
/* Ethernet support */
#endif
#ifdef CONFIG_SUNXI_GMAC
-#define CONFIG_DW_AUTONEG
#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */
#define CONFIG_PHY_ADDR 1
#define CONFIG_MII /* MII PHY management */
-#define CONFIG_PHYLIB
+#define CONFIG_PHY_REALTEK
#endif
#ifdef CONFIG_USB_EHCI_HCD
#endif
#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 0
-
-#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#endif
-#ifdef CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_G_DNL_VENDOR_NUM 0x1f3a
-#define CONFIG_G_DNL_PRODUCT_NUM 0x1010
-#define CONFIG_G_DNL_MANUFACTURER "Allwinner Technology"
+#ifdef CONFIG_USB_FUNCTION_DFU
+#define CONFIG_CMD_DFU
+#define CONFIG_DFU_RAM
#endif
#ifdef CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
+#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FASTBOOT_FLASH
+
+#ifdef CONFIG_MMC
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
#define CONFIG_EFI_PARTITION
#endif
+#endif
#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE
* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
* 1M script, 1M pxe and the ramdisk at the end.
*/
+
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
+
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0xa000000\0" \
- "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \
- "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \
- "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \
- "pxefile_addr_r=" __stringify(SDRAM_OFFSET(3200000)) "\0" \
- "ramdisk_addr_r=" __stringify(SDRAM_OFFSET(3300000)) "\0"
+ "kernel_addr_r=" KERNEL_ADDR_R "\0" \
+ "fdt_addr_r=" FDT_ADDR_R "\0" \
+ "scriptaddr=" SCRIPT_ADDR_R "\0" \
+ "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
+ "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
+
+#define DFU_ALT_INFO_RAM \
+ "dfu_alt_info_ram=" \
+ "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
+ "fdt ram " FDT_ADDR_R " 0x100000;" \
+ "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
#ifdef CONFIG_MMC
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
+#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
+#else
+#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
+#endif
#else
#define BOOT_TARGET_DEVICES_MMC(func)
+#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
#endif
#ifdef CONFIG_AHCI
#define BOOT_TARGET_DEVICES(func) \
func(FEL, fel, na) \
BOOT_TARGET_DEVICES_MMC(func) \
+ BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
BOOT_TARGET_DEVICES_SCSI(func) \
BOOT_TARGET_DEVICES_USB(func) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+#define BOOTCMD_SUNXI_COMPAT \
+ "bootcmd_sunxi_compat=" \
+ "setenv root /dev/mmcblk0p3 rootwait; " \
+ "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
+ "echo Loaded environment from uEnv.txt; " \
+ "env import -t 0x44000000 ${filesize}; " \
+ "fi; " \
+ "setenv bootargs console=${console} root=${root} ${extraargs}; " \
+ "ext2load mmc 0 0x43000000 script.bin && " \
+ "ext2load mmc 0 0x48000000 uImage && " \
+ "bootm 0x48000000\0"
+#else
+#define BOOTCMD_SUNXI_COMPAT
+#endif
+
#include <config_distro_bootcmd.h>
#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_EXTRA_ENV_SETTINGS \
CONSOLE_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
+ DFU_ALT_INFO_RAM \
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"console=ttyS0,115200\0" \
+ BOOTCMD_SUNXI_COMPAT \
BOOTENV
#else /* ifndef CONFIG_SPL_BUILD */
projects / oweals / u-boot.git / blobdiff