configs: sama5d2_ptc_ek: add onewire and eeprom drivers

[oweals/u-boot.git] / include / configs / stm32f429-discovery.h

diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h
index 8191fb2b8a5a7ab98dd63650cd04bba8135d6f7e..31c17d081867f09bd054cabc3074ac02aa9e1420 100644 (file)
--- a/include/configs/stm32f429-discovery.h
+++ b/include/configs/stm32f429-discovery.h
@@ -1,68 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2015
- * Kamil Lulko, <rev13@wp.pl>
- *
- * SPDX-License-Identifier:    GPL-2.0+
+ * Kamil Lulko, <kamil.lulko@gmail.com>
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_STM32F4
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_STM32F4DISCOVERY
-
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_SYS_FLASH_BASE          0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR                0x10010000
-#define CONFIG_SYS_TEXT_BASE           0x08000000
-
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * Configuration of the external SDRAM memory
  */
-#define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_RAM_SIZE            (8 << 20)
-#define CONFIG_SYS_RAM_CS              1
-#define CONFIG_SYS_RAM_FREQ_DIV                2
-#define CONFIG_SYS_RAM_BASE            0xD0000000
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_RAM_BASE
-#define CONFIG_SYS_LOAD_ADDR           0xD0400000
-#define CONFIG_LOADADDR                        0xD0400000
+#define CONFIG_SYS_LOAD_ADDR           0x90400000
+#define CONFIG_LOADADDR                        0x90400000
 
 #define CONFIG_SYS_MAX_FLASH_SECT      12
 #define CONFIG_SYS_MAX_FLASH_BANKS     2
 
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OFFSET              (256 << 10)
 #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 #define CONFIG_ENV_SIZE                        (8 << 10)
 
-#define CONFIG_BOARD_SPECIFIC_LED
 #define CONFIG_RED_LED                 110
 #define CONFIG_GREEN_LED               109
 
-#define CONFIG_STM32_GPIO
-#define CONFIG_STM32_SERIAL
-/*
- * Configuration of the USART
- * 1:   TX:PA9  RX:PA10
- * 2:   TX:PD5  RX:PD6
- * 3:   TX:PC10 RX:PC11
- * 6:   TX:PG14 RX:PG9
- */
-#define CONFIG_STM32_USART             1
-
-#define CONFIG_STM32_HSE_HZ            8000000
-
-#define CONFIG_SYS_CLK_FREQ            180000000 /* 180 MHz */
+#define CONFIG_STM32_FLASH
 
 #define CONFIG_SYS_HZ_CLOCK            1000000 /* Timer is clocked at 1MHz */
 
@@ -72,18 +37,9 @@
 #define CONFIG_REVISION_TAG
 
 #define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE \
-                                       + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS             16
 
 #define CONFIG_SYS_MALLOC_LEN          (2 << 20)
 
-#define CONFIG_STACKSIZE               (64 << 10)
-
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
 #define CONFIG_BOOTCOMMAND                                             \
        "run bootcmd_romfs"
 
@@ -92,18 +48,8 @@
        "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
        "bootm 0x08044000 - 0x08042000\0"
 
-#define CONFIG_BOOTDELAY               3
-#define CONFIG_AUTOBOOT
-
 /*
  * Command line configuration.
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_CMD_MEM
-#define CONFIG_CMD_TIMER
 
 #endif /* __CONFIG_H */