ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot

[oweals/u-boot.git] / include / configs / snapper9g45.h

diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index 4a623f774688c9bfc04b1421bd62d3acd18861fb..0fd43f8c5c46cb3ca103d72f134241d1f0af8bbb 100644 (file)
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -15,8 +15,6 @@
 #include <asm/hardware.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_TEXT_BASE           0x73f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
@@ -26,8 +24,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -44,7 +40,6 @@
 #define CONFIG_NAND_ATMEL
 #define CONFIG_ATMEL_NAND_HWECC
 #define CONFIG_SYS_NAND_ECC_BASE       ATMEL_BASE_ECC
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -55,7 +50,6 @@
 
 /* Ethernet */
 #define CONFIG_MACB
-#define CONFIG_PHYLIB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R
@@ -63,22 +57,11 @@
 #define CONFIG_TFTP_PORT
 #define CONFIG_TFTP_TSIZE
 
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-#define CONFIG_DOS_PARTITION
-#define CONFIG_PARTITION_UUIDS
-
 /* MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 
 /* LCD */
 #define CONFIG_ATMEL_LCD
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_GURNARD_SPLASH
 
 #define CONFIG_ATMEL_SPI
@@ -90,7 +73,6 @@
 
 /* UARTs/Serial console */
 #define CONFIG_ATMEL_USART
-#define CONFIG_BAUDRATE                        115200
 
 /* Boot options */
 #define CONFIG_SYS_LOAD_ADDR           0x23000000
@@ -101,7 +83,6 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /* Environment settings */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              (512 << 10)
 #define CONFIG_ENV_SIZE                        (256 << 10)
 #define CONFIG_ENV_OVERWRITE
@@ -127,10 +108,6 @@
        "altbootcmd=run boot_mmc ; run boot_usb ; run boot_safe ; run boot_working\0"
 
 /* Console settings */
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE +            \
-                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
@@ -141,12 +118,8 @@
 /* Command line configuration */
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PART
 
 #endif /* __CONFIG_H */