Merge branch 'testing' into working

[oweals/u-boot.git] / include / configs / sequoia.h

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 23243a4971af809be6fc3b9d6e38a1422227fe4c..3f75a441a0d8d9eede36742c8f8b12a6acab963a 100644 (file)
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -37,6 +37,7 @@
 #else
 #define CONFIG_440GRX          1               /* Specific PPC440GRx   */
 #endif
+#define CONFIG_440             1               /* ... PPC440 family    */
 #define CONFIG_4xx             1               /* ... PPC4xx family    */
 /* Detect Sequoia PLL input clock automatically via CPLD bit           */
 #define CONFIG_SYS_CLK_FREQ    ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
@@ -58,6 +59,7 @@
 #define CFG_MONITOR_BASE       TEXT_BASE
 #define CFG_NAND_ADDR          0xd0000000      /* NAND Flash           */
 #define CFG_OCM_BASE           0xe0010000      /* ocm                  */
+#define CFG_OCM_DATA_ADDR      CFG_OCM_BASE
 #define CFG_PCI_BASE           0xe0000000      /* Internal PCI regs    */
 #define CFG_PCI_MEMBASE                0x80000000      /* mapped pci memory    */
 #define CFG_PCI_MEMBASE1       CFG_PCI_MEMBASE  + 0x10000000
@@ -80,7 +82,7 @@
 #define CFG_INIT_RAM_END       (4 << 10)
 #define CFG_GBL_DATA_SIZE      256             /* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET     CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET     CFG_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -125,7 +127,7 @@
 #define CFG_FLASH_QUIET_TEST   1       /* don't warn upon unknown flash        */
 
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE      0x20000         /* size of one complete sector  */
+#define CFG_ENV_SECT_SIZE      0x20000 /* size of one complete sector          */
 #define CFG_ENV_ADDR           ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
 #define        CFG_ENV_SIZE            0x2000  /* Total Size of Environment Sector     */
 
@@ -297,9 +299,6 @@
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
-#define CMD_USB                        CFG_CMD_USB
-#else
-#define CMD_USB                        0       /* no USB on 440GRx             */
 #endif /* CONFIG_440EPX */
 
 /* Partitions */
@@ -307,37 +306,68 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
-#define CONFIG_COMMANDS       (CONFIG_CMD_DFL  |       \
-                              CFG_CMD_ASKENV   |       \
-                              CFG_CMD_DHCP     |       \
-                              CFG_CMD_DTT      |       \
-                              CFG_CMD_DIAG     |       \
-                              CFG_CMD_EEPROM   |       \
-                              CFG_CMD_ELF      |       \
-                              CFG_CMD_FAT      |       \
-                              CFG_CMD_I2C      |       \
-                              CFG_CMD_IRQ      |       \
-                              CFG_CMD_MII      |       \
-                              CFG_CMD_NAND     |       \
-                              CFG_CMD_NET      |       \
-                              CFG_CMD_NFS      |       \
-                              CFG_CMD_PCI      |       \
-                              CFG_CMD_PING     |       \
-                              CFG_CMD_REGINFO  |       \
-                              CFG_CMD_SDRAM    |       \
-                              CMD_USB)
 
-#define CONFIG_SUPPORT_VFAT
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#ifdef CONFIG_440EPX
+#define CONFIG_CMD_USB
+#endif
+
+
+/* POST support */
+#define CONFIG_POST            (CFG_POST_MEMORY   | \
+                                CFG_POST_CPU      | \
+                                CFG_POST_UART     | \
+                                CFG_POST_I2C      | \
+                                CFG_POST_CACHE    | \
+                                CFG_POST_FPU      | \
+                                CFG_POST_ETHER    | \
+                                CFG_POST_SPR)
+
+#define CFG_POST_WORD_ADDR     (CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR    0x10000000 /* free virtual address      */
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+#define CONFIG_SUPPORT_VFAT
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size      */
@@ -370,7 +400,6 @@
 #define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_PRE_INIT               /* enable board pci_pre_init()  */
 #define CFG_PCI_TARGET_INIT
 #define CFG_PCI_MASTER_INIT
 
@@ -428,7 +457,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_DCACHE_SIZE                (32<<10)  /* For AMCC 440 CPUs                  */
 #define CFG_CACHELINE_SIZE     32            /* ...                                */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5             /* log base 2 of the above value  */
 #endif
 
@@ -440,7 +469,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2           /* which serial port to use */
 #endif