Merge branch 'master' of ssh://10.10.0.7/home/wd/git/u-boot/master

[oweals/u-boot.git] / include / configs / sc520_cdp.h

diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 58d656cbf081930ee6526b3d61448a7726cae107..0042e30057379bfcb6a9fcb8e91e066332ee8dda 100644 (file)
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -28,6 +28,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define GRUSS_TESTING
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -62,7 +63,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_MALLOC_SIZE     (CFG_ENV_SIZE + 128*1024)
+#define CONFIG_MALLOC_SIZE     (CONFIG_ENV_SIZE + 128*1024)
 
 #define CONFIG_BAUDRATE                9600
 
@@ -81,13 +82,17 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_PCI
+#ifndef GRUSS_TESTING
+#define CONFIG_CMD_SATA
+#else
+#undef CONFIG_CMD_SATA
+#endif
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_IDE
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_EEPROM
 
 #define CONFIG_BOOTDELAY       15
-#define CONFIG_BOOTARGS        "root=/dev/mtdblock0 console=ttyS0,9600"
+#define CONFIG_BOOTARGS                "root=/dev/mtdblock0 console=ttyS0,9600"
 /* #define CONFIG_BOOTCOMMAND  "bootm 38000000" */
 
 #if defined(CONFIG_CMD_KGDB)
@@ -139,10 +144,10 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM   1
+#define CONFIG_ENV_IS_IN_EEPROM   1
 #define CONFIG_SPI
-#define CFG_ENV_SIZE          0x4000   /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
-#define CFG_ENV_OFFSET         0
+#define CONFIG_ENV_SIZE               0x4000   /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
+#define CONFIG_ENV_OFFSET         0
 #define CONFIG_SC520_CDP_USE_SPI  /* Store configuration in the SPI part */
 #undef CONFIG_SC520_CDP_USE_MW    /* Store configuration in the MicroWire part */
 #define CONFIG_SPI_X 1
@@ -172,35 +177,21 @@
 #define CONFIG_PCNET_79C975
 #define PCNET_HAS_PROM         1
 
-/************************************************************
- * IDE/ATA stuff
- ************************************************************/
-#define CFG_IDE_MAXBUS         1   /* max. 2 IDE busses        */
-#define CFG_IDE_MAXDEVICE      (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-
-#define CFG_ATA_IDE0_OFFSET    0x01F0  /* ide0 offste */
-/*#define CFG_ATA_IDE1_OFFSET  0x0170  /###* ide1 offset */
-#define CFG_ATA_DATA_OFFSET    0       /* data reg offset      */
-#define CFG_ATA_REG_OFFSET     0       /* reg offset */
-#define CFG_ATA_ALT_OFFSET     0x200   /* alternate register offset */
-#define CFG_ATA_BASE_ADDR       0
-
-#undef CONFIG_IDE_LED                  /* no led for ide supported     */
-#undef  CONFIG_IDE_RESET               /* reset for ide unsupported... */
-#undef  CONFIG_IDE_RESET_ROUTINE       /* no special reset function */
-
 /************************************************************
 *SATA/Native Stuff
 ************************************************************/
+#ifndef GRUSS_TESTING
 #define CFG_SATA_MAXBUS         2       /*Max Sata buses supported */
 #define CFG_SATA_DEVS_PER_BUS   2      /*Max no. of devices per bus/port */
-#define CFG_SATA_MAXDEVICES     (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
-#define CFG_ATA_PIIX            1       /*Supports ata_piix driver */
+#define CFG_SATA_MAX_DEVICE     (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
+#define CONFIG_ATA_PIIX                1       /*Supports ata_piix driver */
+#else
+#undef CFG_SATA_MAXBUS
+#undef CFG_SATA_DEVS_PER_BUS
+#undef CFG_SATA_MAX_DEVICE
+#undef CONFIG_ATA_PIIX
+#endif
 
-/************************************************************
- * ATAPI support (experimental)
- ************************************************************/
-#define CONFIG_ATAPI                   /* enable ATAPI Support */
 
 /************************************************************
  * DISK Partition support
@@ -212,7 +203,11 @@
 /************************************************************
  * Video/Keyboard support
  ************************************************************/
+#ifndef GRUSS_TESTING
 #define CONFIG_VIDEO                   /* To enable video controller support */
+#else
+#undef CONFIG_VIDEO
+#endif
 #define CONFIG_I8042_KBD
 #define CFG_ISA_IO 0
 
@@ -225,6 +220,7 @@
 /*
  * PCI stuff
  */
+#ifndef GRUSS_TESTING
 #define CONFIG_PCI                                /* include pci support */
 #define CONFIG_PCI_PNP                            /* pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW
@@ -233,5 +229,11 @@
 #define        CFG_SECOND_PCI_IRQ  9
 #define CFG_THIRD_PCI_IRQ   11
 #define        CFG_FORTH_PCI_IRQ   15
+#else
+#undef CONFIG_PCI
+#undef CONFIG_PCI_PNP
+#undef CONFIG_PCI_SCAN_SHOW
+#endif
+
 
 #endif /* __CONFIG_H */