ARMV7: OMAP3: Implement relocation for Overo

[oweals/u-boot.git] / include / configs / sbc8641d.h

diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 752a9058d5b4b7cdf60013499f06c2f82a236faf..a7831c05450d0c3ca858c0f0abd7703d68de12fe 100644 (file)
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -40,7 +40,7 @@
 #define CONFIG_MPC86xx         1       /* MPC86xx */
 #define CONFIG_MPC8641         1       /* MPC8641 specific */
 #define CONFIG_SBC8641D                1       /* SBC8641D board specific */
-#define CONFIG_NUM_CPUS         2       /* Number of CPUs in the system */
+#define CONFIG_MP              1       /* support multiple processors */
 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
 
 #ifdef RUN_DIAG
@@ -56,8 +56,8 @@
 #define CONFIG_SYS_SCRATCH_VA  0xe8000000
 
 #define CONFIG_PCI             1       /* Enable PCIE */
-#define CONFIG_PCI1            1       /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCI2            1       /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1           1       /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2           1       /* PCIE controler 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
@@ -104,8 +104,9 @@
 #define CONFIG_SYS_CCSRBAR             0xf8000000      /* relocated CCSRBAR */
 #define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 
-#define CONFIG_SYS_PCI1_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR           (CONFIG_SYS_CCSRBAR+0x9000)
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH   0x0
+#define CONFIG_SYS_CCSRBAR_PHYS                CONFIG_SYS_CCSRBAR_PHYS_LOW
 
 /*
  * DDR Setup
@@ -117,8 +118,6 @@
 #define CONFIG_SYS_MAX_DDR_BAT_SIZE    0x80000000      /* BAT mapping size */
 #define CONFIG_VERY_BIG_RAM
 
-#define MPC86xx_DDR_SDRAM_CLK_CNTL
-
 #define CONFIG_NUM_DDR_CONTROLLERS     2
 #define CONFIG_DIMM_SLOTS_PER_CTLR     2
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
@@ -258,7 +257,6 @@
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -283,9 +281,6 @@
 #define CONFIG_OF_BOARD_SETUP          1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-#define CONFIG_SYS_64BIT_STRTOUL       1
-
 /*
  * I2C
  */
@@ -308,19 +303,23 @@
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE       0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE       0x20000000      /* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE        0xe2000000
-#define CONFIG_SYS_PCI1_IO_PHYS        CONFIG_SYS_PCI1_IO_BASE
-#define CONFIG_SYS_PCI1_IO_SIZE        0x1000000       /* 16M */
-
-#define CONFIG_SYS_PCI2_MEM_BASE       0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS       CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE       0x10000000      /* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE        0xe3000000
-#define CONFIG_SYS_PCI2_IO_PHYS        CONFIG_SYS_PCI2_IO_BASE
-#define CONFIG_SYS_PCI2_IO_SIZE        0x1000000       /* 16M */
+#define CONFIG_SYS_PCIE1_MEM_BUS       0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS      CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_VIRT      CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
+#define CONFIG_SYS_PCIE1_IO_BUS                0xe2000000
+#define CONFIG_SYS_PCIE1_IO_PHYS       CONFIG_SYS_PCIE1_IO_BUS
+#define CONFIG_SYS_PCIE1_IO_VIRT       CONFIG_SYS_PCIE1_IO_BUS
+#define CONFIG_SYS_PCIE1_IO_SIZE       0x1000000       /* 16M */
+
+#define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS      CONFIG_SYS_PCIE2_MEM_BUS
+#define CONFIG_SYS_PCIE2_MEM_VIRT      CONFIG_SYS_PCIE2_MEM_BUS
+#define CONFIG_SYS_PCIE2_MEM_SIZE      0x10000000      /* 256M */
+#define CONFIG_SYS_PCIE2_IO_BUS                0xe3000000
+#define CONFIG_SYS_PCIE2_IO_PHYS       CONFIG_SYS_PCIE2_IO_BUS
+#define CONFIG_SYS_PCIE2_IO_VIRT       CONFIG_SYS_PCIE2_IO_BUS
+#define CONFIG_SYS_PCIE2_IO_SIZE       0x1000000       /* 16M */
 
 #if defined(CONFIG_PCI)
 
@@ -406,10 +405,10 @@
  * 0xa000_0000  512M   PCI-Express 2 Memory
  *     Changed it for operating from 0xd0000000
  */
-#define CONFIG_SYS_DBAT1L      ( CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW \
+#define CONFIG_SYS_DBAT1L      ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \
                        | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U      (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L      (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT1U      (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L      (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT1U      CONFIG_SYS_DBAT1U
 
 /*
@@ -432,16 +431,27 @@
 #define CONFIG_SYS_IBAT3L      (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT3U      CONFIG_SYS_DBAT3U
 
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
+                                      | BATL_PP_RW | BATL_CACHEINHIBIT \
+                                      | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
+                                      | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
+                                      | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
+#endif
+
 /*
  * BAT4         32M    Cache-inhibited, guarded
  * 0xe200_0000  16M    PCI-Express 1 I/O
  * 0xe300_0000  16M    PCI-Express 2 I/0
  *    Note that this is at 0xe0000000
  */
-#define CONFIG_SYS_DBAT4L      ( CONFIG_SYS_PCI1_IO_BASE | BATL_PP_RW \
+#define CONFIG_SYS_DBAT4L      ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \
                        | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U      (CONFIG_SYS_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L      (CONFIG_SYS_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT4U      (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L      (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT4U      CONFIG_SYS_DBAT4U
 
 /*