ppc4xx: Update DU440 config

[oweals/u-boot.git] / include / configs / sbc2410x.h

diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index 866f7b042616b5d7c697c4ba246b3267458c5994..110ab3904dfd9987b1a87af18e7c88b0f067ce45 100644 (file)
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -57,7 +57,7 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN         (CFG_ENV_SIZE + 128*1024)
+#define CFG_MALLOC_LEN         (CONFIG_ENV_SIZE + 128*1024)
 #define CFG_GBL_DATA_SIZE      128     /* size in bytes reserved for initial data */
 
 /*
@@ -82,27 +82,33 @@
 
 #define CONFIG_BAUDRATE                115200
 
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
-                       (CONFIG_CMD_DFL  | \
-                       CFG_CMD_CACHE    | \
-                       /*CFG_CMD_NAND   |*/ \
-                       /*CFG_CMD_EEPROM |*/ \
-                       /*CFG_CMD_I2C    |*/ \
-                       /*CFG_CMD_USB    |*/ \
-                       CFG_CMD_REGINFO  | \
-                       CFG_CMD_DATE     | \
-                       CFG_CMD_PING     | \
-                       CFG_CMD_DHCP     | \
-                       CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTARGS        "console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
+#define CONFIG_BOOTARGS                "console=ttySAC0 root=/dev/nfs " \
+               "nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv " \
+               "ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
 #define CONFIG_ETHADDR         08:00:3e:26:0a:5b
 #define CONFIG_NETMASK          255.255.255.0
 #define CONFIG_IPADDR          192.168.0.69
@@ -110,7 +116,7 @@
 /*#define CONFIG_BOOTFILE      "elinos-lart" */
 #define CONFIG_BOOTCOMMAND     "dhcp; bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */
@@ -174,26 +180,26 @@
 #ifdef CONFIG_AMD_LV800
 #define PHYS_FLASH_SIZE                0x00100000 /* 1MB */
 #define CFG_MAX_FLASH_SECT     (19)    /* max number of sectors on one chip */
-#define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
+#define CONFIG_ENV_ADDR                (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
 #endif
 
 #ifdef CONFIG_AMD_LV400
 #define PHYS_FLASH_SIZE                0x00080000 /* 512KB */
 #define CFG_MAX_FLASH_SECT     (11)    /* max number of sectors on one chip */
-#define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x070000) /* addr of environment */
+#define CONFIG_ENV_ADDR                (CFG_FLASH_BASE + 0x070000) /* addr of environment */
 #endif
 
 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT   (5*CFG_HZ) /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT   (5*CFG_HZ) /* Timeout for Flash Write */
 
-#define        CFG_ENV_IS_IN_FLASH     1
-#define CFG_ENV_SIZE           0x10000 /* Total Size of Environment Sector */
+#define        CONFIG_ENV_IS_IN_FLASH  1
+#define CONFIG_ENV_SIZE                0x10000 /* Total Size of Environment Sector */
 
 /*-----------------------------------------------------------------------
  * NAND flash settings
  */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
 #define CFG_MAX_NAND_DEVICE    1       /* Max number of NAND devices           */
 #define SECTORSIZE 512
 
@@ -201,7 +207,7 @@
 #define ADDR_PAGE 2
 #define ADDR_COLUMN_PAGE 3
 
-#define NAND_ChipID_UNKNOWN    0x00
+#define NAND_ChipID_UNKNOWN    0x00
 #define NAND_MAX_FLOORS 1
 #define NAND_MAX_CHIPS 1
 
@@ -219,7 +225,7 @@
 #define NAND_CTL_CLRCLE(nandptr)
 #define NAND_CTL_SETCLE(nandptr)
 /* #undef CONFIG_MTD_NAND_VERIFY_WRITE */
-#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
 
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG