usb: dwc3: Add dwc3 glue driver support for STi

[oweals/u-boot.git] / include / configs / sama5d2_xplained.h

diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 8e7358687a72cd502c9126c0165a832db83db2f9..4f24a56899a982caed671cf5d656ada8a3fa4cee 100644 (file)
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -10,23 +10,20 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
 #define CONFIG_MISC_INIT_R
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x20000000
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR                0x210000
+#define CONFIG_SYS_INIT_SP_ADDR                0x218000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR           0x22000000 /* load address */
@@ -38,24 +35,6 @@
 #define CONFIG_SF_DEFAULT_SPEED                30000000
 #endif
 
-/* NAND flash */
-#undef CONFIG_CMD_NAND
-
-/* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D2 XPlained"
-
-/* I2C */
-#define AT24MAC_ADDR           0x5c
-#define AT24MAC_REG            0x9a
-
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_MACB_SEARCH_PHY
-
 /* LCD */
 
 #ifdef CONFIG_LCD
@@ -64,24 +43,18 @@
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
 #endif
 
-#ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_SD_BOOT
 
 /* bootstrap + u-boot + env in sd card */
-#undef FAT_ENV_DEVICE_AND_PART
 #undef CONFIG_BOOTCOMMAND
 
-#define FAT_ENV_DEVICE_AND_PART        "1"
 #define CONFIG_BOOTCOMMAND     "fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \
                                "fatload mmc 1:1 0x22000000 zImage; " \
                                "bootz 0x22000000 - 0x21000000"
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
-       "console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait"
 
 #endif
 
@@ -94,17 +67,15 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/armv7/u-boot-spl.lds
+#ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
-#elif CONFIG_SYS_USE_SERIALFLASH
+#elif CONFIG_SPI_BOOT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
 
 #endif