*/
/*
- * This file contains the configuration parameters for the dbau1x00 board.
+ * This file contains the configuration parameters for qemu-mips target.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
-#define CONFIG_QEMU_MIPS 1
+#define CONFIG_MIPS32 /* MIPS32 CPU core */
+#define CONFIG_QEMU_MIPS
#define CONFIG_MISC_INIT_R
-#undef DEBUG
-
-/*IP address is default used by Qemu*/
-#define CONFIG_IPADDR 10.0.2.15 /* Our IP address */
-#define CONFIG_SERVERIP 10.0.2.2 /* Server IP address*/
-
-#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
+#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
#define CONFIG_BAUDRATE 115200
-/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#undef CONFIG_BOOTARGS
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#undef CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"addmisc=setenv bootargs ${bootargs} " \
"console=ttyS0,${baudrate} " \
"panic=1\0" \
#define CONFIG_BOOTCOMMAND "bootp;bootelf"
-
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
#define CONFIG_CMD_DHCP
#define CONFIG_DRIVER_NE2000
-#define CONFIG_DRIVER_NE2000_BASE (0xb4000300)
+#define CONFIG_DRIVER_NE2000_BASE 0xb4000300
-#define CFG_NO_FLASH
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK 115200
-#define CFG_NS16550_COM1 (0xb40003f8)
-#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK 115200
+#define CONFIG_SYS_NS16550_COM1 0xb40003f8
+#define CONFIG_CONS_INDEX 1
#define CONFIG_CMD_IDE
#define CONFIG_DOS_PARTITION
-#define CFG_IDE_MAXBUS 2
-#define CFG_ATA_IDE0_OFFSET (0x1f0)
-#define CFG_ATA_IDE1_OFFSET (0x170)
-#define CFG_ATA_DATA_OFFSET (0)
-#define CFG_ATA_REG_OFFSET (0)
-#define CFG_ATA_BASE_ADDR (0xb4000000)
+#define CONFIG_SYS_IDE_MAXBUS 2
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
+#define CONFIG_SYS_ATA_DATA_OFFSET 0
+#define CONFIG_SYS_ATA_REG_OFFSET 0
+#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
-#define CFG_IDE_MAXDEVICE (4)
+#define CONFIG_SYS_IDE_MAXDEVICE 4
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "qemu-mips # " /* Monitor Command Prompt */
+/* Monitor Command Prompt */
+#if defined(CONFIG_SYS_LITTLE_ENDIAN)
+#define CONFIG_SYS_PROMPT "qemu-mipsel # "
+#else
+#define CONFIG_SYS_PROMPT "qemu-mips # "
+#endif
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args*/
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_HUSH_PARSER
-#define CFG_MALLOC_LEN 128*1024
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
-#define CFG_BOOTPARAMS_LEN 128*1024
+#define CONFIG_SYS_MALLOC_LEN 128*1024
-#define CFG_MHZ 132
+#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-#define CFG_HZ (CFG_MHZ * 1000000)
+#define CONFIG_SYS_MHZ 132
-#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */
+#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CFG_LOAD_ADDR 0x81000000 /* default load address */
+#define CONFIG_SYS_HZ 1000
-#define CFG_MEMTEST_START 0x80100000
-#define CFG_MEMTEST_END 0x80800000
+/* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x81000000
+
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x80800000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-
/* The following #defines are needed to get flash environment right */
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (192 << 10)
+#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (192 << 10)
-#define CFG_INIT_SP_OFFSET 0x400000
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
/* We boot from this flash, selected with dip switch */
-#define CFG_FLASH_BASE 0xbfc00000
+#define CONFIG_SYS_FLASH_BASE 0xbfc00000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CFG_ENV_IS_NOWHERE 1
+/* Address and size of Primary Environment Sector */
+#define CONFIG_ENV_SIZE 0x8000
-/* Address and size of Primary Environment Sector */
-#define CFG_ENV_SIZE 0x10000
-#undef CONFIG_NET_MULTI
+#define CONFIG_ENV_OVERWRITE 1
-#define MEM_SIZE 128
+#define MEM_SIZE 128
-#undef CONFIG_MEMSIZE_IN_BYTES
+#define CONFIG_LZMA
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384
-#define CFG_ICACHE_SIZE 16384
-#define CFG_CACHELINE_SIZE 32
+#define CONFIG_SYS_DCACHE_SIZE 16384
+#define CONFIG_SYS_ICACHE_SIZE 16384
+#define CONFIG_SYS_CACHELINE_SIZE 32
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_H */