#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
-#define CONFIG_QEMU_MIPS 1
+#define CONFIG_MIPS32 /* MIPS32 CPU core */
+#define CONFIG_QEMU_MIPS
#define CONFIG_MISC_INIT_R
-/*IP address is default used by Qemu*/
-#define CONFIG_IPADDR 10.0.2.15 /* Our IP address */
-#define CONFIG_SERVERIP 10.0.2.2 /* Server IP address */
-
#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_DHCP
#define CONFIG_DRIVER_NE2000
-#define CONFIG_DRIVER_NE2000_BASE (0xb4000300)
+#define CONFIG_DRIVER_NE2000_BASE 0xb4000300
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK 115200
-#define CONFIG_SYS_NS16550_COM1 (0xb40003f8)
-#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 0xb40003f8
+#define CONFIG_CONS_INDEX 1
#define CONFIG_CMD_IDE
#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_ATA_IDE0_OFFSET (0x1f0)
-#define CONFIG_SYS_ATA_IDE1_OFFSET (0x170)
-#define CONFIG_SYS_ATA_DATA_OFFSET (0)
-#define CONFIG_SYS_ATA_REG_OFFSET (0)
-#define CONFIG_SYS_ATA_BASE_ADDR (0xb4000000)
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
+#define CONFIG_SYS_ATA_DATA_OFFSET 0
+#define CONFIG_SYS_ATA_REG_OFFSET 0
+#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
-#define CONFIG_SYS_IDE_MAXDEVICE (4)
+#define CONFIG_SYS_IDE_MAXDEVICE 4
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "qemu-mips # " /* Monitor Command Prompt */
+/* Monitor Command Prompt */
+#if defined(CONFIG_SYS_LITTLE_ENDIAN)
+#define CONFIG_SYS_PROMPT "qemu-mipsel # "
+#else
+#define CONFIG_SYS_PROMPT "qemu-mips # "
+#endif
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN 128*1024
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+/* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x80800000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-
/* The following #defines are needed to get flash environment right */
+#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_FLASH_BASE 0xbfc00000
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 128
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
/* Address and size of Primary Environment Sector */
#define MEM_SIZE 128
-#undef CONFIG_MEMSIZE_IN_BYTES
-
#define CONFIG_LZMA
/*-----------------------------------------------------------------------