/*
* Debug
*
- * DEBUG - Define this is you want extra debug info
- * GTREGREAD - Required to build with debug
- * do_bdinfo - Required to build with debug
+ * DEBUG - Define this is you want extra debug info
+ * GTREGREAD - Required to build with debug
+ * do_bdinfo - Required to build with debug
*/
-#undef DEBUG
-#define GTREGREAD(x) 0xFFFFFFFF
+#ifdef DEBUG
+#define GTREGREAD(x) 0xFFFFFFFF
#define do_bdinfo(a,b,c,d)
-
+#endif
/*
* CPU type
*
- * CONFIG_7xx - We have a 750 or 755 CPU
- * CONFIG_74xx - We have a 7400 CPU
- * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
- * CONFIG_BUS_CLK - System bus clock in Hz
+ * CONFIG_7xx - We have a 750 or 755 CPU
+ * CONFIG_74xx - We have a 7400 CPU
+ * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
+ * CONFIG_BUS_CLK - System bus clock in Hz
*/
#define CONFIG_7xx
#undef CONFIG_74xx
#undef CONFIG_ALTIVEC
-#define CONFIG_BUS_CLK 66000000
+#define CONFIG_BUS_CLK 66000000
+#define CONFIG_SYS_TEXT_BASE 0xFFF00000
/*
* Monitor configuration
* CMD_PCI - PCI Bus scanning command
*/
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_ENV
+#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_RUN
#define CONFIG_CMD_ELF
#define CONFIG_CMD_NET
* Serial configuration
*
* CONFIG_CONS_INDEX - Serial console port number (COM1)
- * CONFIG_BAUDRATE - Serial speed
+ * CONFIG_BAUDRATE - Serial speed
*/
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
/*
* PCI config
*
- * CONFIG_PCI - Enable PCI bus
- * CONFIG_PCI_PNP - Enable Plug & Play support
+ * CONFIG_PCI - Enable PCI bus
+ * CONFIG_PCI_PNP - Enable Plug & Play support
* CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup
*/
/*
* Network config
*
- * CONFIG_NET_MULTI - Support for multiple network interfaces
- * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
- * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
+ * CONFIG_NET_MULTI - Support for multiple network interfaces
+ * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
+ * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
*/
#define CONFIG_NET_MULTI
* Boot config
*
* CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot
- * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
+ * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
*/
#define CONFIG_BOOTCOMMAND \
*
* This board runs in a standard CHRP (Map-B) configuration.
*
- * Type Start End Size Width Chip Sel
+ * Type Start End Size Width Chip Sel
* ----------- ----------- ----------- ------- ------- --------
- * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
- * User LED's 0x78000000 RCS3
- * UART 0x7C000000 RCS2
- * Mailbox 0xFF000000 RCS1
- * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
+ * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
+ * User LED's 0x78000000 RCS3
+ * UART 0x7C000000 RCS2
+ * Mailbox 0xFF000000 RCS1
+ * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
*
* Flash sectors are laid out as follows.
*
- * Sector Start End Size Comments
+ * Sector Start End Size Comments
* ------- ----------- ----------- ------- -----------
- * 0 0xFFC00000 0xFFC3FFFF 256KB
- * 1 0xFFC40000 0xFFC7FFFF 256KB
- * 2 0xFFC80000 0xFFCBFFFF 256KB
- * 3 0xFFCC0000 0xFFCFFFFF 256KB
- * 4 0xFFD00000 0xFFD3FFFF 256KB
- * 5 0xFFD40000 0xFFD7FFFF 256KB
- * 6 0xFFD80000 0xFFDBFFFF 256KB
- * 7 0xFFDC0000 0xFFDFFFFF 256KB
- * 8 0xFFE00000 0xFFE3FFFF 256KB
- * 9 0xFFE40000 0xFFE7FFFF 256KB
- * 10 0xFFE80000 0xFFEBFFFF 256KB
- * 11 0xFFEC0000 0xFFEFFFFF 256KB
- * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
- * 13 0xFFF40000 0xFFF7FFFF 256KB
- * 14 0xFFF80000 0xFFFBFFFF 256KB
- * 15 0xFFFC0000 0xFFFDFFFF 128KB
- * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
- * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
- * 18 0xFFFF0000 0xFFFFFFFF 64KB
+ * 0 0xFFC00000 0xFFC3FFFF 256KB
+ * 1 0xFFC40000 0xFFC7FFFF 256KB
+ * 2 0xFFC80000 0xFFCBFFFF 256KB
+ * 3 0xFFCC0000 0xFFCFFFFF 256KB
+ * 4 0xFFD00000 0xFFD3FFFF 256KB
+ * 5 0xFFD40000 0xFFD7FFFF 256KB
+ * 6 0xFFD80000 0xFFDBFFFF 256KB
+ * 7 0xFFDC0000 0xFFDFFFFF 256KB
+ * 8 0xFFE00000 0xFFE3FFFF 256KB
+ * 9 0xFFE40000 0xFFE7FFFF 256KB
+ * 10 0xFFE80000 0xFFEBFFFF 256KB
+ * 11 0xFFEC0000 0xFFEFFFFF 256KB
+ * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
+ * 13 0xFFF40000 0xFFF7FFFF 256KB
+ * 14 0xFFF80000 0xFFFBFFFF 256KB
+ * 15 0xFFFC0000 0xFFFDFFFF 128KB
+ * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
+ * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
+ * 18 0xFFFF0000 0xFFFFFFFF 64KB
*/
/*
* SDRAM config - see memory map details above.
*
- * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
- * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
+ * CONFIG_SYS_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
+ * CONFIG_SYS_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 0x04000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000
/*
* Flash config - see memory map details above.
*
- * CFG_FLASH_BASE - Start address of flash memory
- * CFG_FLASH_SIZE - Total size of contiguous flash mem
- * CFG_FLASH_ERASE_TOUT - Erase timeout in ms
- * CFG_FLASH_WRITE_TOUT - Write timeout in ms
- * CFG_MAX_FLASH_BANKS - Number of banks of flash on board
- * CFG_MAX_FLASH_SECT - Number of sectors in a bank
+ * CONFIG_SYS_FLASH_BASE - Start address of flash memory
+ * CONFIG_SYS_FLASH_SIZE - Total size of contiguous flash mem
+ * CONFIG_SYS_FLASH_ERASE_TOUT - Erase timeout in ms
+ * CONFIG_SYS_FLASH_WRITE_TOUT - Write timeout in ms
+ * CONFIG_SYS_MAX_FLASH_BANKS - Number of banks of flash on board
+ * CONFIG_SYS_MAX_FLASH_SECT - Number of sectors in a bank
*/
-#define CFG_FLASH_BASE 0xFFC00000
-#define CFG_FLASH_SIZE 0x00400000
-#define CFG_FLASH_ERASE_TOUT 250000
-#define CFG_FLASH_WRITE_TOUT 5000
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MAX_FLASH_SECT 19
+#define CONFIG_SYS_FLASH_BASE 0xFFC00000
+#define CONFIG_SYS_FLASH_SIZE 0x00400000
+#define CONFIG_SYS_FLASH_ERASE_TOUT 250000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 5000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 19
/*
* Monitor config - see memory map details above
*
- * CFG_MONITOR_BASE - Base address of monitor code
- * CFG_MALLOC_LEN - Size of malloc pool (128KB)
+ * CONFIG_SYS_MONITOR_BASE - Base address of monitor code
+ * CONFIG_SYS_MALLOC_LEN - Size of malloc pool (128KB)
*/
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MALLOC_LEN 0x20000
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN 0x20000
/*
* Command shell settings
*
- * CFG_BARGSIZE - Boot Argument buffer size
- * CFG_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB)
- * CFG_CBSIZE - Console Buffer (input) size
- * CFG_LOAD_ADDR - Default load address
- * CFG_LONGHELP - Provide more detailed help
- * CFG_MAXARGS - Number of args accepted by monitor commands
- * CFG_MEMTEST_START - Start address of test to run on RAM
- * CFG_MEMTEST_END - End address of RAM test
- * CFG_PBSIZE - Print Buffer (output) size
- * CFG_PROMPT - Prompt string
+ * CONFIG_SYS_BARGSIZE - Boot Argument buffer size
+ * CONFIG_SYS_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB)
+ * CONFIG_SYS_CBSIZE - Console Buffer (input) size
+ * CONFIG_SYS_LOAD_ADDR - Default load address
+ * CONFIG_SYS_LONGHELP - Provide more detailed help
+ * CONFIG_SYS_MAXARGS - Number of args accepted by monitor commands
+ * CONFIG_SYS_MEMTEST_START - Start address of test to run on RAM
+ * CONFIG_SYS_MEMTEST_END - End address of RAM test
+ * CONFIG_SYS_PBSIZE - Print Buffer (output) size
+ * CONFIG_SYS_PROMPT - Prompt string
*/
-#define CFG_BARGSIZE 1024
-#define CFG_BOOTMAPSZ 0x800000
-#define CFG_CBSIZE 1024
-#define CFG_LOAD_ADDR 0x100000
-#define CFG_LONGHELP
-#define CFG_MAXARGS 16
-#define CFG_MEMTEST_START 0x00040000
-#define CFG_MEMTEST_END 0x00040100
-#define CFG_PBSIZE 1024
-#define CFG_PROMPT "=> "
+#define CONFIG_SYS_BARGSIZE 1024
+#define CONFIG_SYS_BOOTMAPSZ 0x800000
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_LOAD_ADDR 0x100000
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MEMTEST_START 0x00040000
+#define CONFIG_SYS_MEMTEST_END 0x00040100
+#define CONFIG_SYS_PBSIZE 1024
+#define CONFIG_SYS_PROMPT "=> "
/*
* Environment config - see memory map details above
*
- * CFG_ENV_IS_IN_FLASH - The env variables are stored in flash
- * CFG_ENV_ADDR - Address of the sector containing env vars
- * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB)
- * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB)
+ * CONFIG_ENV_IS_IN_FLASH - The env variables are stored in flash
+ * CONFIG_ENV_ADDR - Address of the sector containing env vars
+ * CONFIG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB)
+ * CONFIG_ENV_SECT_SIZE - Size of sector containing env vars (32KB)
*/
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR 0xFFFE0000
-#define CFG_ENV_SIZE 0x1000
-#define CFG_ENV_ADDR_REDUND 0xFFFE8000
-#define CFG_ENV_SIZE_REDUND 0x1000
-#define CFG_ENV_SECT_SIZE 0x8000
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR 0xFFFE0000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_ENV_ADDR_REDUND 0xFFFE8000
+#define CONFIG_ENV_SIZE_REDUND 0x1000
+#define CONFIG_ENV_SECT_SIZE 0x8000
/*
* in the main system RAM just above the exception vectors. The contents are
* copied to top of RAM by the init code.
*
- * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect
- * CFG_INIT_RAM_END - Size of Init RAM
- * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data
- * CFG_GBL_DATA_OFFSET - Start of global data, top of stack
+ * CONFIG_SYS_INIT_RAM_ADDR - Address of Init RAM, above exception vect
+ * CONFIG_SYS_INIT_RAM_SIZE - Size of Init RAM
+ * GENERATED_GBL_DATA_SIZE - Ammount of RAM to reserve for global data
+ * CONFIG_SYS_GBL_DATA_OFFSET - Start of global data, top of stack
*/
-#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000)
-#define CFG_INIT_RAM_END 0x4000
-#define CFG_GBL_DATA_SIZE 128
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000)
+#define CONFIG_SYS_INIT_RAM_SIZE 0x4000
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* BAT3 - PCI I/O including Flash Memory
*/
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L CFG_IBAT0L
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CFG_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
/*
* Cache config
*
- * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific)
- * CFG_L2 - L2 cache enabled if defined
- * L2_INIT - L2 cache init flags
- * L2_ENABLE - L2 cache enable flags
+ * CONFIG_SYS_CACHELINE_SIZE - Size of a cache line (CPU specific)
+ * CONFIG_SYS_L2 - L2 cache enabled if defined
+ * L2_INIT - L2 cache init flags
+ * L2_ENABLE - L2 cache enable flags
*/
-#define CFG_CACHELINE_SIZE 32
-#undef CFG_L2
-#define L2_INIT 0
-#define L2_ENABLE 0
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#undef CONFIG_SYS_L2
+#define L2_INIT 0
+#define L2_ENABLE 0
/*
* Clocks config
*
- * CFG_BUS_HZ - Bus clock frequency in Hz
- * CFG_BUS_CLK - As above (?)
- * CFG_HZ - Decrementer freq in Hz
+ * CONFIG_SYS_BUS_CLK - Bus clock frequency in Hz
+ * CONFIG_SYS_HZ - Decrementer freq in Hz
*/
-#define CFG_BUS_HZ CONFIG_BUS_CLK
-#define CFG_BUS_CLK CONFIG_BUS_CLK
-#define CFG_HZ 1000
+#define CONFIG_SYS_BUS_CLK CONFIG_BUS_CLK
+#define CONFIG_SYS_HZ 1000
/*
* Serial port config
*
- * CFG_BAUDRATE_TABLE - List of valid baud rates
- * CFG_NS16550 - Include the NS16550 driver
- * CFG_NS16550_SERIAL - Include the serial (wrapper) driver
- * CFG_NS16550_CLK - Frequency of reference clock
- * CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port
- * CFG_NS16550_COM1 - Base address of 1st serial port
+ * CONFIG_SYS_BAUDRATE_TABLE - List of valid baud rates
+ * CONFIG_SYS_NS16550 - Include the NS16550 driver
+ * CONFIG_SYS_NS16550_SERIAL - Include the serial (wrapper) driver
+ * CONFIG_SYS_NS16550_CLK - Frequency of reference clock
+ * CONFIG_SYS_NS16550_REG_SIZE - 64-bit accesses to 8-bit port
+ * CONFIG_SYS_NS16550_COM1 - Base address of 1st serial port
*/
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_CLK 3686400
-#define CFG_NS16550_REG_SIZE -8
-#define CFG_NS16550_COM1 0x7C000000
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_CLK 3686400
+#define CONFIG_SYS_NS16550_REG_SIZE -8
+#define CONFIG_SYS_NS16550_COM1 0x7C000000
/*
* PCI Config - Address Map B (CHRP)
*/
-#define CFG_PCI_MEMORY_BUS 0x00000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x40000000
-#define CFG_PCI_MEM_BUS 0x80000000
-#define CFG_PCI_MEM_PHYS 0x80000000
-#define CFG_PCI_MEM_SIZE 0x7D000000
-#define CFG_ISA_MEM_BUS 0x00000000
-#define CFG_ISA_MEM_PHYS 0xFD000000
-#define CFG_ISA_MEM_SIZE 0x01000000
-#define CFG_PCI_IO_BUS 0x00800000
-#define CFG_PCI_IO_PHYS 0xFE800000
-#define CFG_PCI_IO_SIZE 0x00400000
-#define CFG_ISA_IO_BUS 0x00000000
-#define CFG_ISA_IO_PHYS 0xFE000000
-#define CFG_ISA_IO_SIZE 0x00800000
-#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
-#define CFG_ISA_IO CFG_ISA_IO_PHYS
-#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS
+#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
+#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
+#define CONFIG_SYS_PCI_MEM_SIZE 0x7D000000
+#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
+#define CONFIG_SYS_ISA_MEM_PHYS 0xFD000000
+#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
+#define CONFIG_SYS_PCI_IO_BUS 0x00800000
+#define CONFIG_SYS_PCI_IO_PHYS 0xFE800000
+#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
+#define CONFIG_SYS_ISA_IO_BUS 0x00000000
+#define CONFIG_SYS_ISA_IO_PHYS 0xFE000000
+#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
/*
* Extra init functions
*
- * CFG_BOARD_ASM_INIT - Call assembly init code
- */
-
-#define CFG_BOARD_ASM_INIT
-
-
-/*
- * Boot flags
- *
- * BOOTFLAG_COLD - Indicates a power-on boot
- * BOOTFLAG_WARM - Indicates a software reset
+ * CONFIG_SYS_BOARD_ASM_INIT - Call assembly init code
*/
-#define BOOTFLAG_COLD 0x01
-#define BOOTFLAG_WARM 0x02
-
+#define CONFIG_SYS_BOARD_ASM_INIT
#endif /* __CONFIG_H */