apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / porter.h

diff --git a/include/configs/porter.h b/include/configs/porter.h
index d293f06dd1e97fdb06e7b91e70372eebff878305..1db28869cd0c3390be5034292555ec4b0e19c1dd 100644 (file)
--- a/include/configs/porter.h
+++ b/include/configs/porter.h
@@ -1,27 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * include/configs/porter.h
  *     This file is Porter board configuration.
  *
  * Copyright (C) 2015 Renesas Electronics Corporation
  * Copyright (C) 2015 Cogent Embedded, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #ifndef __PORTER_H
 #define __PORTER_H
 
-#undef DEBUG
-#define CONFIG_ARCH_RMOBILE_BOARD_STRING "Porter"
-
 #include "rcar-gen2-common.h"
 
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR                0x7023FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR                0xE633fffC
-#endif
-#define STACK_AREA_SIZE                        0xC000
+#define CONFIG_SYS_INIT_SP_ADDR                0x4f000000
+#define STACK_AREA_SIZE                        0x00100000
 #define LOW_LEVEL_MERAM_STACK \
                (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
 
@@ -30,11 +22,7 @@
 #define RCAR_GEN2_SDRAM_SIZE           (2048u * 1024 * 1024)
 #define RCAR_GEN2_UBOOT_SDRAM_SIZE     (1024u * 1024 * 1024)
 
-/* SCIF */
-
 /* FLASH */
-#define CONFIG_SPI
-#define CONFIG_SH_QSPI
 #define CONFIG_SPI_FLASH_QUAD
 
 /* SH Ether */
@@ -50,22 +38,17 @@
 /* Board Clock */
 #define RMOBILE_XTAL_CLK       20000000u
 #define CONFIG_SYS_CLK_FREQ    RMOBILE_XTAL_CLK
-#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
-
-#define CONFIG_SYS_TMU_CLK_DIV 4
 
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS      3
-#define CONFIG_SYS_I2C_SH_SPEED0       400000
-#define CONFIG_SYS_I2C_SH_SPEED1       400000
-#define CONFIG_SYS_I2C_SH_SPEED2       400000
-#define CONFIG_SH_I2C_DATA_HIGH                4
-#define CONFIG_SH_I2C_DATA_LOW         5
-#define CONFIG_SH_I2C_CLOCK            10000000
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+       "bootm_size=0x10000000\0"
 
-#define CONFIG_SYS_I2C_POWERIC_ADDR    0x58 /* da9063 */
+/* SPL support */
+#define CONFIG_SPL_STACK               0xe6340000
+#define CONFIG_SPL_MAX_SIZE            0x4000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x140000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_CONS_SCIF0
+#define CONFIG_SH_SCIF_CLK_FREQ                65000000
+#endif
 
 #endif /* __PORTER_H */