powerpc/85xx: Fix NAND SPL support

[oweals/u-boot.git] / include / configs / pm9g45.h

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 690f119f4cd94a1971c3736ce097ed60fd940a10..acc120445184bca895fae680609cabebf85c7c95 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -32,13 +32,20 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core */
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
+
 #define CONFIG_PM9G45          1       /* It's an Ronetix PM9G45 */
-#define CONFIG_AT91SAM9G45     1       /* It's an Atmel AT91SAM9G45 SoC */
+#define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9G45"
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 #define CONFIG_SYS_HZ                  1000
+#define CONFIG_SYS_TEXT_BASE           0x73f00000
 
 #define CONFIG_ARCH_CPU_INIT
 
@@ -47,14 +54,14 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers
  */
 #define CONFIG_AT91_GPIO       1
 #define CONFIG_ATMEL_USART     1
-#define CONFIG_USART3          1       /* USART 3 is DBGU */
+#define CONFIG_USART_BASE              ATMEL_BASE_DBGU
+#define        CONFIG_USART_ID                 ATMEL_ID_SYS
 
 #define CONFIG_SYS_USE_NANDFLASH       1
 
@@ -80,6 +87,7 @@
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_IMLS
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING                1
 #define CONFIG_CMD_DHCP                1
 #define CONFIG_CMD_NAND                1
@@ -120,7 +128,6 @@
 /* Ethernet */
 #define CONFIG_MACB                    1
 #define CONFIG_RMII                    1
-#define CONFIG_NET_MULTI               1
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R             1
 
@@ -175,7 +182,10 @@
  */
 #define CONFIG_SYS_MALLOC_LEN          ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
                                        0x1000)
-#define CONFIG_SYS_GBL_DATA_SIZE       128 /* 128 bytes for initial data */
+
+#define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+                               GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_STACKSIZE               (32*1024)       /* regular stack */