#undef CONFIG_LCD
#undef CONFIG_MMC
#define BOARD_LATE_INIT 1
+#define CONFIG_SYS_TEXT_BASE 0x0
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* Hardware drivers
*/
/* None - PLEB 2 doesn't have any of this.
- #define CONFIG_DRIVER_LAN91C96
- #define CONFIG_LAN91C96_BASE 0x0C000000 */
+ #define CONFIG_NET_MULTI
+ #define CONFIG_LAN91C96
+ #define CONFIG_LAN91C96_BASE 0x0C000000
+ */
/*
* select serial console configuration
*/
+#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1 /* we use FFUART on PLEB 2 */
/* allow to overwrite serial and ethaddr */
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#define CONFIG_BOOTDELAY 3
/*
* Miscellaneous configurable options
*/
-#define CFG_HUSH_PARSER 1
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CFG_LONGHELP /* undef to save memory */
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT "$ " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
#else
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#endif
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_DEVICE_NULLDEV 1
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_DEVICE_NULLDEV 1
-#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
-#define CFG_LOAD_ADDR 0xa2000000 /* default load address */
-
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#endif
/*
* Stack sizes
/*
* Physical Memory Map
*/
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */
-#define CFG_DRAM_BASE PHYS_SDRAM_1
-#define CFG_DRAM_SIZE PHYS_SDRAM_1_SIZE
+#define CONFIG_SYS_DRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE
+
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CFG_FLASH_BASE PHYS_FLASH_1
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
/*
* GPIO settings
*/
-#define CFG_GPSR0_VAL 0x00000000 /* Don't set anything */
-#define CFG_GPSR1_VAL 0x00000080
-#define CFG_GPSR2_VAL 0x00000000
+#define CONFIG_SYS_GPSR0_VAL 0x00000000 /* Don't set anything */
+#define CONFIG_SYS_GPSR1_VAL 0x00000080
+#define CONFIG_SYS_GPSR2_VAL 0x00000000
-#define CFG_GPCR0_VAL 0x00000000 /* Don't clear anything */
-#define CFG_GPCR1_VAL 0x00000000
-#define CFG_GPCR2_VAL 0x00000000
+#define CONFIG_SYS_GPCR0_VAL 0x00000000 /* Don't clear anything */
+#define CONFIG_SYS_GPCR1_VAL 0x00000000
+#define CONFIG_SYS_GPCR2_VAL 0x00000000
-#define CFG_GPDR0_VAL 0x00000000
-#define CFG_GPDR1_VAL 0x000007C3
-#define CFG_GPDR2_VAL 0x00000000
+#define CONFIG_SYS_GPDR0_VAL 0x00000000
+#define CONFIG_SYS_GPDR1_VAL 0x000007C3
+#define CONFIG_SYS_GPDR2_VAL 0x00000000
/* Edge detect registers (these are set by the kernel) */
-#define CFG_GRER0_VAL 0x00000000
-#define CFG_GRER1_VAL 0x00000000
-#define CFG_GRER2_VAL 0x00000000
-#define CFG_GFER0_VAL 0x00000000
-#define CFG_GFER1_VAL 0x00000000
-#define CFG_GFER2_VAL 0x00000000
-
-#define CFG_GAFR0_L_VAL 0x00000000
-#define CFG_GAFR0_U_VAL 0x00000000
-#define CFG_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */
-#define CFG_GAFR1_U_VAL 0x00000000
-#define CFG_GAFR2_L_VAL 0x00000000
-#define CFG_GAFR2_U_VAL 0x00000000
-
-#define CFG_PSSR_VAL 0x20
-#define CFG_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */
-#define CFG_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */
-#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */
+#define CONFIG_SYS_GRER0_VAL 0x00000000
+#define CONFIG_SYS_GRER1_VAL 0x00000000
+#define CONFIG_SYS_GRER2_VAL 0x00000000
+#define CONFIG_SYS_GFER0_VAL 0x00000000
+#define CONFIG_SYS_GFER1_VAL 0x00000000
+#define CONFIG_SYS_GFER2_VAL 0x00000000
+
+#define CONFIG_SYS_GAFR0_L_VAL 0x00000000
+#define CONFIG_SYS_GAFR0_U_VAL 0x00000000
+#define CONFIG_SYS_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */
+#define CONFIG_SYS_GAFR1_U_VAL 0x00000000
+#define CONFIG_SYS_GAFR2_L_VAL 0x00000000
+#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
+
+#define CONFIG_SYS_PSSR_VAL 0x20
+#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */
+#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */
+#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */
/*
* Memory settings
*/
-#define CFG_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */
-#define CFG_MSC1_VAL 0x00000000
-#define CFG_MSC2_VAL 0x00000000
+#define CONFIG_SYS_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */
+#define CONFIG_SYS_MSC1_VAL 0x00000000
+#define CONFIG_SYS_MSC2_VAL 0x00000000
-#define CFG_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM.
+#define CONFIG_SYS_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM.
tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */
-#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual */
+#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual */
/* bits set in lowlevel_init.S */
-#define CFG_MDMRS_VAL 0x00000000
+#define CONFIG_SYS_MDMRS_VAL 0x00000000
+
+#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
+#define CONFIG_SYS_SXCNFG_VAL 0x00000000
/*
* PCMCIA and CF Interfaces
*/
-#define CFG_MECR_VAL 0x00000000 /* Hangover from Lubbock.
+#define CONFIG_SYS_MECR_VAL 0x00000000 /* Hangover from Lubbock.
Needs calculating. (DS/CHC) */
-#define CFG_MCMEM0_VAL 0x00010504
-#define CFG_MCMEM1_VAL 0x00010504
-#define CFG_MCATT0_VAL 0x00010504
-#define CFG_MCATT1_VAL 0x00010504
-#define CFG_MCIO0_VAL 0x00004715
-#define CFG_MCIO1_VAL 0x00004715
+#define CONFIG_SYS_MCMEM0_VAL 0x00010504
+#define CONFIG_SYS_MCMEM1_VAL 0x00010504
+#define CONFIG_SYS_MCATT0_VAL 0x00010504
+#define CONFIG_SYS_MCATT1_VAL 0x00010504
+#define CONFIG_SYS_MCIO0_VAL 0x00004715
+#define CONFIG_SYS_MCIO1_VAL 0x00004715
/*
* FLASH and environment organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
/* timeout values are in ticks */
/* FIXME */
-#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
/* Flash protection */
-#define CFG_FLASH_PROTECTION 1
+#define CONFIG_SYS_FLASH_PROTECTION 1
/* FIXME */
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x3C000) /* Addr of Environment Sector */
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */
-#define CFG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x3C000) /* Addr of Environment Sector */
+#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */
+#define CONFIG_ENV_SECT_SIZE 0x20000
/* Option added to get around byte ordering issues in the flash driver */
-#define CFG_LITTLE_ENDIAN 1
+#define CONFIG_SYS_LITTLE_ENDIAN 1
#endif /* __CONFIG_H */