+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014, Barco (www.barco.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __PLATINUM_CONFIG_H__
#include "imx6_spl.h" /* common IMX6 SPL configuration */
#include "mx6_common.h"
-/*
- * Console configuration
- */
-
-#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_UBIFS
-
/*
* Hardware configuration
*/
/* Ethernet config */
#define CONFIG_FEC_MXC
-#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_PHYLIB
-
/* USB config */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
/* Memory config */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#ifndef PHYS_SDRAM_SIZE
#define PHYS_SDRAM_SIZE (1024 << 20)
#ifdef CONFIG_CMD_NAND
/* NAND config */
-#define CONFIG_NAND_MXS
#ifndef CONFIG_SYS_NAND_MAX_CHIPS
#define CONFIG_SYS_NAND_MAX_CHIPS 2
#endif
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA config, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* Environment in NAND */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET (16 << 20)
-#define CONFIG_ENV_SECT_SIZE (128 << 10)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#else /* CONFIG_CMD_NAND */
/* Environment in MMC */
-#define CONFIG_ENV_SIZE (8 << 10)
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif /* CONFIG_CMD_NAND */
*/
/* Board startup config */
-#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
#define CONFIG_BOOTCOMMAND "run bootubi_scr"
/* Miscellaneous configurable options */
-#define CONFIG_PREBOOT
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
/* MTD/UBI/UBIFS config */
-#define CONFIG_LZO
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-
-#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
-#define MTDIDS_DEFAULT "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
- "512k(env1),512k(env2),-(ubi)"
-#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
-#define MTDIDS_DEFAULT "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
- "512k(env1),512k(env2),495M(ubi0)," \
- "14M(res0),2M(res1)," \
- "512k(res2),512k(res3),-(ubi1)"
-#endif
/*
* Environment configuration
"baudrate=115200\0" \
"boot_scr=boot.uboot\0" \
"boot_vol=0\0" \
- "mtdids="MTDIDS_DEFAULT"\0" \
- "mtdparts="MTDPARTS_DEFAULT"\0" \
+ "mtdids="CONFIG_MTDIDS_DEFAULT"\0" \
+ "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
"mmcfs=ext2\0" \
"mmcrootpart=1\0" \
\