board: ls1012a: FRWY-LS1012A board support

[oweals/u-boot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 1b665b2c15d877e2c5ff278310b74db80e9a2012..115ad7ff7ab22f99886031e9298fe12693a95ddc 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2010-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -145,10 +144,8 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
 #define CONFIG_SPL_PAD_TO              0x20000
 #define CONFIG_SPL_MAX_SIZE            (128 * 1024)
@@ -168,7 +165,6 @@
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
 #define CONFIG_SPL_PAD_TO              0x20000
 #define CONFIG_SPL_MAX_SIZE            (128 * 1024)
@@ -212,14 +208,9 @@
 #define CONFIG_SPL_PAD_TO              0x20000
 #define CONFIG_TPL_PAD_TO              0x20000
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0xeff40000
-#endif
-
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
 #endif
@@ -241,12 +232,9 @@
 #define CONFIG_FSL_PCIE_RESET  /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
 
-#define CONFIG_TSEC_ENET       /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_SATA_SIL
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
 
 #if defined(CONFIG_TARGET_P2020RDB)
@@ -272,7 +260,6 @@
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x1fffffff
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
 #define CONFIG_SYS_CCSRBAR             0xffe00000
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
@@ -438,8 +425,6 @@
 #endif
 #endif /* CONFIG_NAND_FSL_ELBC */
 
-#define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */
-
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000 /* stack in RAM */
 #ifdef CONFIG_PHYS_64BIT
@@ -565,7 +550,6 @@
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_CONS_INDEX              1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -782,6 +766,7 @@
 #ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
 #endif
 #endif
 
@@ -790,7 +775,6 @@
 #endif
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
@@ -799,8 +783,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 /*
@@ -818,7 +800,7 @@
 /*
  * Environment Configuration
  */
-#define CONFIG_HOSTNAME                unknown
+#define CONFIG_HOSTNAME                "unknown"
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       u-boot.bin /* U-Boot image on TFTP server */