ARM: configs: Add da850evm_nand to boot from NAND

[oweals/u-boot.git] / include / configs / omapl138_lcdk.h

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index d67a619a8cab76198325c0ba46ee9ad034373381..39fdf063f2bca995df92b0dafd76ecc95a24be84 100644 (file)
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
  *
  * Based on davinci_dvevm.h. Original Copyrights follow:
  *
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:    GPL-2.0
  */
 
 #ifndef __CONFIG_H
@@ -14,10 +13,8 @@
 /*
  * Board
  */
-#define CONFIG_DRIVER_TI_EMAC
 #undef CONFIG_USE_SPIFLASH
 #undef CONFIG_SYS_USE_NOR
-#define        CONFIG_USE_NAND
 
 /*
 * Disable DM_* for SPL build and can be re-enabled after adding
@@ -52,8 +49,6 @@
 /* memtest will be run on 16MB */
 #define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
 
-#define CONFIG_NR_DRAM_BANKS   1 /* we have 1 bank of DRAM */
-
 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (      \
        DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
        DAVINCI_SYSCFG_SUSPSRC_SPI1 |           \
@@ -122,7 +117,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 #endif
 
-#define CONFIG_SPI
 #define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
 #define CONFIG_SF_DEFAULT_SPEED                30000000
@@ -136,7 +130,6 @@
 /*
  * I2C Configuration
  */
-#define CONFIG_SYS_I2C_DAVINCI
 #define CONFIG_SYS_DAVINCI_I2C_SPEED   25000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
 #define CONFIG_SYS_I2C_EXPANDER_ADDR   0x20
@@ -144,8 +137,7 @@
 /*
  * Flash & Environment
  */
-#ifdef CONFIG_USE_NAND
-#define CONFIG_NAND_DAVINCI
+#ifdef CONFIG_NAND
 #define CONFIG_ENV_OFFSET              0x0 /* Block 0--not used by bootcode */
 #define CONFIG_ENV_SIZE                        (128 << 9)
 #define        CONFIG_SYS_NAND_USE_FLASH_BBT
@@ -210,7 +202,6 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
 #undef CONFIG_DRIVER_TI_EMAC_USE_RMII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS2
@@ -221,7 +212,6 @@
 /*
  * U-Boot general configuration
  */
-#define CONFIG_MISC_INIT_R
 #define CONFIG_BOOTFILE                "zImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
@@ -261,15 +251,7 @@
 #define CONFIG_CLOCKS
 #endif
 
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
-#ifdef CONFIG_USE_NAND
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#endif
-
-#if !defined(CONFIG_USE_NAND) && \
+#if !defined(CONFIG_NAND) && \
        !defined(CONFIG_SYS_USE_NOR) && \
        !defined(CONFIG_USE_SPIFLASH)
 #define CONFIG_ENV_SIZE                (16 << 10)