atmel: at91sam9x5: add spi flash boot support

[oweals/u-boot.git] / include / configs / omap5_evm.h

diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index d3d526310ea54fd45593351dd411a9b8d937b09e..4f0a6c13582c75e7968fc740b741d44fffa3dc93 100644 (file)
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -38,7 +38,7 @@
 #define CONFIG_OMAP54XX        /* which is a 54XX */
 #define CONFIG_OMAP5430        /* which is in a 5430 */
 #define CONFIG_5430EVM /* working with EVM */
-#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_OMAP_GPIO
 
 /* Get CPU defs */
 #include <asm/arch/cpu.h>
@@ -49,10 +49,9 @@
 #define CONFIG_DISPLAY_BOARDINFO
 
 /* Clock Defines */
-#define V_OSCK 38400000 /* Clock output from T2 */
+#define V_OSCK                 19200000        /* Clock output from T2 */
 #define V_SCLK V_OSCK
 
-#undef CONFIG_USE_IRQ  /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT
@@ -97,9 +96,10 @@
 #define CONFIG_DRIVER_OMAP34XX_I2C
 #define CONFIG_I2C_MULTI_BUS
 
-/* TWL6030 */
-#define CONFIG_TWL6030_POWER
-#define CONFIG_CMD_BAT
+/* TWL6035 */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_TWL6035_POWER
+#endif
 
 /* MMC */
 #define CONFIG_GENERIC_MMC
@@ -111,14 +111,8 @@
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         1       /* SLOT2: eMMC(1) */
 #define CONFIG_ENV_OFFSET              0xE0000
+#define CONFIG_CMD_SAVEENV
 
-/* USB */
-#define CONFIG_MUSB_UDC
-#define CONFIG_USB_OMAP3
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE
-#define CONFIG_USB_TTY
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* Flash */
@@ -154,7 +148,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
-       "console=ttyS2,115200n8\0" \
+       "console=ttyO2,115200n8\0" \
        "usbtty=cdc_acm\0" \
        "vram=16M\0" \
        "mmcdev=0\0" \
@@ -191,7 +185,6 @@
 
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "OMAP5430 EVM # "
 #define CONFIG_SYS_CBSIZE              256
 /* Print Buffer Size */
@@ -215,17 +208,6 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* Regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack */
-#endif
-
 /*
  * SDRAM Memory Map
  * Even though we use two CS all the memory
@@ -234,10 +216,7 @@
 #define CONFIG_NR_DRAM_BANKS   1
 
 #define CONFIG_SYS_SDRAM_BASE          0x80000000
-#define CONFIG_SYS_INIT_RAM_ADDR       0x4030D800
-#define CONFIG_SYS_INIT_RAM_SIZE       0x800
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_SIZE - \
+#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
                                         GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -250,9 +229,9 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
-#define CONFIG_SPL_TEXT_BASE           0x40304350
-#define CONFIG_SPL_MAX_SIZE            0x1E000 /* 120K */
-#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
+#define CONFIG_SPL_TEXT_BASE           0x40300350
+#define CONFIG_SPL_MAX_SIZE            0x19000 /* 100K */
+#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
@@ -266,7 +245,7 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 /*
  * 64 bytes before this address should be set aside for u-boot.img's