microblaze: Enable phylib and mii support

[oweals/u-boot.git] / include / configs / omap4_common.h

diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 42a8f10ade742bf0639d43d02310f73954a20308..a989721afc4eab7ce6f743961e801d5f1303b913 100644 (file)
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -150,7 +150,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
-       "console=ttyS2,115200n8\0" \
+       "console=ttyO2,115200n8\0" \
        "usbtty=cdc_acm\0" \
        "vram=16M\0" \
        "mmcdev=0\0" \
@@ -239,6 +239,7 @@
 #define CONFIG_SYS_L2_PL310            1
 #define CONFIG_SYS_PL310_BASE  0x48242000
 #endif
+#define CONFIG_SYS_CACHELINE_SIZE      32
 
 /* Defines for SDRAM init */
 #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -254,18 +255,21 @@
 #define CONFIG_SPL_MAX_SIZE            (38 * 1024)
 #define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 
-#define CONFIG_SPL_BSS_START_ADDR      0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
 /*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * header. That is 80E7FFC0--0x80E80000 should not be used for any
  * other needs.
  */
-#define CONFIG_SYS_TEXT_BASE           0x80100000
-#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000        /* 1 MB */
+#define CONFIG_SYS_TEXT_BASE           0x80E80000
 
+/*
+ * BSS and malloc area 64MB into memory to allow enough
+ * space for the kernel at the beginning of memory
+ */
+#define CONFIG_SPL_BSS_START_ADDR      0x84000000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x100000        /* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START    0x84100000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000        /* 1 MB */
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */