apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / omap3_overo.h

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index d53657f91623ad2bd549b4c4d7720540ccf52f78..ea941dbb81abc012c55ed3cdcdce2f6d304cc0d7 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -1,24 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the Gumstix Overo board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
-
 #include <configs/ti_omap3_common.h>
 /*
  * We are only ever GP parts and will utilize all of the "downloaded image"
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE           0x40200000
 
 /* call misc_init_r */
-#define CONFIG_MISC_INIT_R
 
 /* pass the revision tag */
 #define CONFIG_REVISION_TAG
@@ -33,7 +27,6 @@
 /* I2C Support */
 
 /* TWL4030 LED */
-#define CONFIG_TWL4030_LED
 
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       183
@@ -41,8 +34,6 @@
 /* commands to include */
 
 #ifdef CONFIG_NAND
-#define CONFIG_MTD_PARTITIONS  /* required for UBI partition support */
-
 /* NAND block size is 128 KiB.  Synchronize these values with
  * overo_nand_partitions in mach-omap2/board-overo.c in Linux:
  *  xloader              4 * NAND_BLOCK_SIZE = 512 KiB
@@ -51,20 +42,9 @@
  *  linux               64 * NAND_BLOCK_SIZE = 8 MiB
  *  rootfs              remainder
  */
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"      \
-       "512k(xloader),"                                \
-       "1792k(u-boot),"                                \
-       "256k(environ),"                                \
-       "8m(linux),"                                    \
-       "-(rootfs)"
-#else /* CONFIG_NAND */
-#define MTDPARTS_DEFAULT
 #endif /* CONFIG_NAND */
 
 /* Board NAND Info. */
-#define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
-                                                       /* to access nand */
 /* Environment information */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        DEFAULT_LINUX_BOOT_ENV \
@@ -82,7 +62,7 @@
        "mmcrootfstype=ext4 rootwait\0" \
        "nandroot=ubi0:rootfs ubi.mtd=4\0" \
        "nandrootfstype=ubifs\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "mmcargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "mpurate=${mpurate} " \
@@ -175,25 +155,15 @@
 #define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
 
 #define ONENAND_ENV_OFFSET             0x240000 /* environment starts here */
-#define SMNAND_ENV_OFFSET              0x240000 /* environment starts here */
-
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
-
-/* Configure SMSC9211 ethernet */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE            0x2C000000
-#endif /* (CONFIG_CMD_NET) */
+#define CONFIG_ENV_OFFSET              0x240000
+#define CONFIG_ENV_ADDR                        0x240000
 
 /* Initial RAM setup */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE       0x800
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_MAX_ECCPOS  56
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64