MX51: vision2: Fix build for vision2 board.

[oweals/u-boot.git] / include / configs / omap3_overo.h

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 69f912679eae05b29e8b5e5883f8ee85b39f690c..242b317d031dd4bee4117ffe4d901d0cb525292e 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -52,14 +52,14 @@
 #define CONFIG_INITRD_TAG              1
 #define CONFIG_REVISION_TAG            1
 
+#define CONFIG_OF_LIBFDT               1
+
 /*
  * Size of malloc() pool
  */
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
                                                /* Sector */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
-                                               /* initial data */
 
 /*
  * Hardware drivers
@@ -120,6 +120,7 @@
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
 #define CONFIG_SYS_I2C_BUS_SELECT      1
+#define CONFIG_I2C_MULTI_BUS           1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
 /*
@@ -269,12 +270,11 @@
 #define PISMO1_NAND_SIZE               GPMC_SIZE_128M
 #define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
 
-#define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors on */
-                                               /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
-#define CONFIG_SYS_FLASH_BASE          boot_flash_base
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
@@ -284,33 +284,10 @@
 #define ONENAND_ENV_OFFSET             0x240000 /* environment starts here */
 #define SMNAND_ENV_OFFSET              0x240000 /* environment starts here */
 
-#define CONFIG_SYS_ENV_SECT_SIZE       boot_flash_sec
-#define CONFIG_ENV_OFFSET              boot_flash_off
+#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
+#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS       (CONFIG_SYS_MAX_FLASH_BANKS + \
-                                       CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK    CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS     1
-
-#ifndef __ASSEMBLY__
-extern unsigned int boot_flash_base;
-extern volatile unsigned int boot_flash_env_addr;
-extern unsigned int boot_flash_off;
-extern unsigned int boot_flash_sec;
-extern unsigned int boot_flash_type;
-#endif
-
 #if defined(CONFIG_CMD_NET)
 /*----------------------------------------------------------------------------
  * SMSC9211 Ethernet from SMSC9118 family
@@ -325,6 +302,10 @@ extern unsigned int boot_flash_type;
 #endif /* (CONFIG_CMD_NET) */
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR                (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE       0x800
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
 
 #endif                         /* __CONFIG_H */