sh: Fix compile error sh7763rdp board

[oweals/u-boot.git] / include / configs / omap2420h4.h

diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 5674e20fc8227005adf1a54dafb65b59087819fc..88a3f6eb95b73daaa366f2dd031133293ef9386e 100644 (file)
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -40,7 +40,7 @@
 
 /* Clock config to target*/
 #define PRCM_CONFIG_II 1
-//#define PRCM_CONFIG_III              1
+/* #define PRCM_CONFIG_III             1 */
 
 #include <asm/arch/omap2420.h>        /* get chip and board defs */
 
@@ -119,19 +119,39 @@
 #define CONFIG_BAUDRATE          115200
 #define CFG_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 #ifdef CFG_NAND_BOOT
-#define CONFIG_COMMANDS          (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2)
+    #define CONFIG_CMD_DHCP
+    #define CONFIG_CMD_I2C
+    #define CONFIG_CMD_NAND
+    #define CONFIG_CMD_JFFS2
 #else
-#define CONFIG_COMMANDS          ((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT)
+    #define CONFIG_CMD_DHCP
+    #define CONFIG_CMD_I2C
+    #define CONFIG_CMD_JFFS2
+
+    #undef CONFIG_CMD_AUTOSCRIPT
 #endif
-#define CONFIG_BOOTP_MASK        CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
 
 /*
  *  Board NAND Info.
  */
+#define CFG_NAND_LEGACY
 #define CFG_NAND_ADDR 0x04000000  /* physical address to access nand at CS0*/
 
 #define CFG_MAX_NAND_DEVICE 1  /* Max number of NAND devices */
@@ -157,7 +177,6 @@
 #define NAND_WP_OFF()  do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
 #define NAND_WP_ON()  do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
 
-
 #define NAND_CTL_CLRALE(nandptr)
 #define NAND_CTL_SETALE(nandptr)
 #define NAND_CTL_CLRCLE(nandptr)
@@ -165,7 +184,6 @@
 #define NAND_DISABLE_CE(nand)
 #define NAND_ENABLE_CE(nand)
 
-
 #define CONFIG_BOOTDELAY         3
 
 #ifdef NFS_BOOT_DEFAULTS
@@ -261,14 +279,11 @@
 #define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
 #endif
 
-
-
-
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */
 #define CFG_FLASH_CFI          1       /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE 1   /* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION   1       /* Use hardware sector protection */