* Scott McNutt <smcnutt@psyent.com>
* (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
/*
* BOARD/CPU
*/
-#include "../board/altera/nios2-generic/custom_fpga.h" /* fpga parameters */
-#define CONFIG_BOARD_NAME "nios2-generic" /* custom board name */
-#define CONFIG_BOARD_EARLY_INIT_F /* enable early board-spec. init */
-#define CONFIG_SYS_NIOS_SYSID_BASE CONFIG_SYS_SYSID_BASE
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE
/*
* SERIAL
*/
-#define CONFIG_ALTERA_UART
-#if defined(CONFIG_ALTERA_JTAG_UART)
-# define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_JTAG_UART_BASE
-#else
-# define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_UART_BASE
-#endif
-
-#define CONFIG_ALTERA_JTAG_UART_BYPASS
-#define CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE CONFIG_SYS_UART_BAUD
-#define CONFIG_SYS_BAUDRATE_TABLE {CONFIG_BAUDRATE}
+#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
/*
- * TIMER
+ * CFI Flash
*/
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_TIMER_BASE
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_TIMER_IRQ
-#define CONFIG_SYS_HZ 1000 /* Always 1000 */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
-#define CONFIG_SYS_NIOS_TMRCNT \
- (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
+#define CONFIG_SYS_FLASH_BASE 0xe0000000
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 512
/*
- * STATUS LED
+ * MII/PHY
*/
-#define CONFIG_STATUS_LED /* Enable status driver */
-#define CONFIG_EPLED /* Enable LED PIO driver */
-#define CONFIG_SYS_LEDPIO_ADDR LED_PIO_BASE
-
-#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
-#define STATUS_LED_STATE 1 /* Blinking */
-#define STATUS_LED_PERIOD (500 / CONFIG_SYS_NIOS_TMRMS) /* 500 msec */
+#define CONFIG_CMD_MII
+#define CONFIG_PHY_GIGE
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_PHY_MARVELL
/*
* BOOTP options
#define CONFIG_BOOTP_HOSTNAME
/*
- * Command line configuration.
+ * FDT options
*/
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BOOTD
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-
-#ifdef CONFIG_CMD_NET
-# define CONFIG_NET_MULTI
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_PING
-#endif
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_LMB
/*
* ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
*/
#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */
+#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */
#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CONFIG_ENV_ADDR ((CONFIG_SYS_RESET_ADDR + \
- CONFIG_SYS_MONITOR_LEN) | \
- CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_ADDR 0xe2840000
/*
* MEMORY ORGANIZATION
- * -Monitor at top of sdram.
- * -The heap is placed below the monitor
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
+ * -Monitor at top of sdram.
+ * -The heap is placed below the monitor
+ * -The stack is placed below the heap (&grows down).
*/
+#define CONFIG_SYS_SDRAM_BASE 0xD0000000
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
CONFIG_SYS_SDRAM_SIZE - \
CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_GBL_DATA_SIZE 256 /* Global data size rsvd */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x20000)
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - \
- CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - \
- CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
/*
* MISC
*/
#define CONFIG_SYS_LONGHELP /* Provide extended help */
-#define CONFIG_SYS_PROMPT "==> " /* Command prompt */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
#define CONFIG_SYS_MAXARGS 16 /* Max command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - 0x20000)
#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMD_GPIO
#endif /* __CONFIG_H */