ARM: imx: vining2000: Convert to ethernet DM

[oweals/u-boot.git] / include / configs / mx7dsabresd.h

diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index fec7e81e7482f8161dde31e925c1b3a2fa688ab0..745507571ddef212257eb2d162b51408e5ec026b 100644 (file)
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX7D SABRESD board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __MX7D_SABRESD_CONFIG_H
@@ -11,7 +10,6 @@
 
 #include "mx7_common.h"
 
-#define CONFIG_DBG_MONITOR
 #define PHYS_SDRAM_SIZE                        SZ_1G
 
 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
@@ -21,7 +19,6 @@
 
 /* Network */
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          0
@@ -33,15 +30,10 @@
 /* MMC Config*/
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
-#undef CONFIG_BOOTM_NETBSD
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
 /* I2C configs */
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED           100000
 
-#define CONFIG_SUPPORT_EMMC_BOOT       /* eMMC specific */
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
 #ifdef CONFIG_IMX_BOOTAUX
@@ -170,7 +162,6 @@
 #define CONFIG_SYS_HZ                  1000
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -183,7 +174,6 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* environment organization */
-#define CONFIG_ENV_SIZE                        SZ_8K
 
 /*
  * If want to use nand, define CONFIG_NAND_MXS and rework board
@@ -197,12 +187,8 @@
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
 #endif
 
-#define CONFIG_ENV_OFFSET              (12 * SZ_64K)
 #ifdef CONFIG_NAND_MXS
 #define CONFIG_SYS_FSL_USDHC_NUM       1
 #else
@@ -214,16 +200,12 @@
 #define CONFIG_MMCROOT                 "/dev/mmcblk0p2"  /* USDHC1 */
 
 /* USB Configs */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 
 #define CONFIG_IMX_THERMAL
 
 #define CONFIG_USBD_HS
 
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
@@ -235,13 +217,7 @@
 #endif
 
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_BAR
-#define CONFIG_SF_DEFAULT_BUS          0
-#define CONFIG_SF_DEFAULT_CS           0
-#define CONFIG_SF_DEFAULT_SPEED                40000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
+#define CONFIG_SYS_FSL_QSPI_AHB
 #define FSL_QSPI_FLASH_NUM             1
 #define FSL_QSPI_FLASH_SIZE            SZ_64M
 #define QSPI0_BASE_ADDR                        QSPI1_IPS_BASE_ADDR