apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / mx53ppd.h

diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index 79c97b5aa3c4152f39abfc89583d689677f57c63..2d6715cba260245b0594f04f982af2b187f490b9 100644 (file)
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2011 Freescale Semiconductor, Inc.
  * Jason Liu <r64343@freescale.com>
  *
  * Configuration settings for Freescale MX53 low cost board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -23,33 +22,21 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_IMX_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000
 
-#define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_REVISION_TAG
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE   UART1_BASE
 
-/* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_SYS_FSL_ESDHC_NUM       2
-
-#define CONFIG_SUPPORT_RAW_INITRD      /* bootz raw initrd support */
-
 /* Eth Configs */
-#define CONFIG_MII
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE   FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR 0x1F
 
 /* USB Configs */
-#define CONFIG_USB_EHCI_MX5
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
@@ -79,11 +66,9 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                        115200
 
 /* Command definition */
-#define CONFIG_SUPPORT_RAW_INITRD
 
 #define CONFIG_ETHPRIME                "FEC0"
 
@@ -99,20 +84,19 @@
        "nfsroot=/opt/springdale/rd\0" \
        "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
                "${kern_ipconf} nfsroot=${nfsserver}:${nfsroot},v3,tcp rw\0" \
-       "choose_ip=if test $use_dhcp = 1; then set kern_ipconf ip=dhcp; " \
-               "set getcmd dhcp; else set kern_ipconf " \
+       "choose_ip=if test $use_dhcp = 1; then setenv kern_ipconf ip=dhcp; " \
+               "setenv getcmd dhcp; else setenv kern_ipconf " \
                "ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off; " \
-               "set getcmd tftp; fi\0" \
+               "setenv getcmd tftp; fi\0" \
        "nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \
                "${nfsserver}:${image}; bootm ${loadaddr}\0" \
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        PPD_CONFIG_NFS \
-       "bootlimit=10\0" \
        "image=/boot/fitImage\0" \
        "fdt_high=0xffffffff\0" \
        "dev=mmc\0" \
-       "devnum=0\0" \
+       "devnum=2\0" \
        "rootdev=mmcblk0p\0" \
        "quiet=quiet loglevel=0\0" \
        "console=" CONSOLE_DEV "\0" \
@@ -174,8 +158,6 @@
 #define CONFIG_ARP_TIMEOUT     200UL
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
 
 #define CONFIG_SYS_MAXARGS     48      /* max number of command args */
@@ -186,10 +168,7 @@
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_CMDLINE_EDITING
-
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS   2
 #define PHYS_SDRAM_1                   CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE              (gd->bd->bi_dram[0].size)
 #define PHYS_SDRAM_2                   CSD1_BASE_ADDR
@@ -206,9 +185,8 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* FLASH and environment organization */
-#define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
-#define CONFIG_ENV_SIZE        (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET      (12 * 64 * 1024)
+#define CONFIG_ENV_SIZE        (10 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
 #define CONFIG_CMD_FUSE
@@ -236,9 +214,4 @@
 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK 66666000
 
-/* Framebuffer and LCD */
-#ifdef CONFIG_VIDEO
-       #define CONFIG_VIDEO_IPUV3
-#endif
-
 #endif                         /* __CONFIG_H */