Davinci: ea20: use gpio framework to access gpios

[oweals/u-boot.git] / include / configs / mx53evk.h

diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 6ac910b6d99f6d7a1ebcdab7566766d2d851c502..a77e5b206d3d89a22955a51d65d43e09bea7d76f 100644 (file)
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -29,37 +29,40 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_L2_OFF
+#define CONFIG_MACH_TYPE       MACH_TYPE_MX53_EVK
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG            1
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
+#define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_OF_LIBFDT
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE   UART1_BASE
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C          1
-#define CONFIG_HARD_I2C         1
-#define CONFIG_I2C_MXC          1
+#define CONFIG_CMD_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MXC
 #define CONFIG_SYS_I2C_MX53_PORT2       1
 #define CONFIG_SYS_I2C_SPEED            100000
 #define CONFIG_SYS_I2C_SLAVE            0xfe
 
 /* PMIC Configs */
-#define CONFIG_FSL_PMIC
-#define CONFIG_FSL_PMIC_I2C
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_FSL
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    8
+#define CONFIG_RTC_MC13XXX
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
@@ -74,7 +77,6 @@
 
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 
@@ -86,6 +88,7 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
+#define CONFIG_CMD_DATE
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -100,7 +103,7 @@
 
 #define CONFIG_BOOTDELAY       3
 
-#define CONFIG_PRIME   "FEC0"
+#define CONFIG_ETHPRIME                "FEC0"
 
 #define CONFIG_LOADADDR                0x70800000      /* loadaddr env var */
 #define CONFIG_SYS_TEXT_BASE    0x77800000
@@ -158,7 +161,7 @@
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0x70000000
-#define CONFIG_SYS_MEMTEST_END         0x10000
+#define CONFIG_SYS_MEMTEST_END         0x70010000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
@@ -190,7 +193,4 @@
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_SYS_BOOTMAPSZ   0x800000
-
 #endif                         /* __CONFIG_H */