microblaze: Enable phylib and mii support

[oweals/u-boot.git] / include / configs / mx51evk.h

diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index b4e57387af0929ed524db5b0e0f14888d5bbaa18..3b18a18d3e84a083dbd4221ccc51982317f4cb90 100644 (file)
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -24,8 +24,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/imx-regs.h>
-
  /* High Level Configuration Options */
 
 #define CONFIG_MX51    /* in a mx51 */
@@ -35,30 +33,34 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_L2_OFF
+#define CONFIG_SYS_TEXT_BASE   0x97800000
 
+#include <asm/arch/imx-regs.h>
 /*
  * Disabled for now due to build problems under Debian and a significant
  * increase in the final file size: 144260 vs. 109536 Bytes.
  */
 
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG            1
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
+#define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_OF_LIBFDT
 
+#define CONFIG_MACH_TYPE       MACH_TYPE_MX51_BABBAGE
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
 
 /*
  * Hardware drivers
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE   UART1_BASE
+#define CONFIG_MXC_GPIO
 
 /*
  * SPI Configs
@@ -67,11 +69,16 @@
 
 #define CONFIG_MXC_SPI
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS    0
 #define CONFIG_FSL_PMIC_CS     0
 #define CONFIG_FSL_PMIC_CLK    2500000
 #define CONFIG_FSL_PMIC_MODE   (SPI_MODE_0 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_BITLEN 32
+#define CONFIG_RTC_MC13XXX
 
 /*
  * MMC Configs
@@ -91,7 +98,6 @@
  * Eth Configs
  */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 
@@ -104,6 +110,19 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT    1
+#define CONFIG_MXC_USB_PORTSC  PORT_PTS_ULPI
+#define CONFIG_MXC_USB_FLAGS   MXC_EHCI_POWER_PINS_ENABLED
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX              1
@@ -118,9 +137,11 @@
 
 #undef CONFIG_CMD_IMLS
 
+#define CONFIG_CMD_DATE
+
 #define CONFIG_BOOTDELAY       3
 
-#define CONFIG_PRIME   "FEC0"
+#define CONFIG_ETHPRIME                "FEC0"
 
 #define CONFIG_LOADADDR                0x90800000      /* loadaddr env var */
 
@@ -203,6 +224,8 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       (IRAM_BASE_ADDR)
 #define CONFIG_SYS_INIT_RAM_SIZE       (IRAM_SIZE)
 
+#define CONFIG_BOARD_EARLY_INIT_F
+
 #define CONFIG_SYS_INIT_SP_OFFSET \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \