Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel

[oweals/u-boot.git] / include / configs / mpc5121ads.h

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index e999e0609dfce25fbf8d155159d52d1cd8bbbc9f..9d1327fada00ea22239c395d114511183e30d2b6 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -46,14 +46,16 @@
  */
 #define CONFIG_E300            1       /* E300 Family */
 #define CONFIG_MPC512X         1       /* MPC512X family */
-#define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
 
-/* video */
-#undef CONFIG_VIDEO
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
 
-#ifdef CONFIG_VIDEO
+/* video */
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_IMMR + 0x2100)
+#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
@@ -72,7 +74,6 @@
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR                0x80000000
-#define CONFIG_SYS_DIU_ADDR            (CONFIG_SYS_IMMR+0x2100)
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest region */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
@@ -241,7 +242,6 @@
 #define CONFIG_SYS_NAND_BASE            0x40000000
 
 #define CONFIG_SYS_MAX_NAND_DEVICE      2
-#define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE  /* driver supports mutipl. chips */
 
 /*
@@ -268,13 +268,12 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SRAM_BASE            /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_SRAM_SIZE            /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_SRAM_SIZE            /* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100                   /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE               /* Start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE            /* Start of monitor */
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)            /* Reserve 512 kB for Mon */
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_MALLOC_LEN          (6 * 1024 * 1024)       /* Reserved for malloc */
@@ -307,7 +306,6 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -362,7 +360,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC     1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                0x1
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_FEC_AN_TIMEOUT  1
@@ -374,6 +371,20 @@
 #define CONFIG_RTC_M41T62                      /* use M41T62 rtc via i2 */
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68    /* at address 0x68              */
 
+/*
+ * USB  Support
+ */
+#define CONFIG_CMD_USB
+
+#if defined(CONFIG_CMD_USB)
+#define CONFIG_USB_EHCI                                /* Enable EHCI Support  */
+#define CONFIG_USB_EHCI_FSL                    /* On a FSL platform    */
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN            /* With big-endian regs */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
 /*
  * Environment
  */
@@ -442,10 +453,15 @@
                                        "mpc5121.nand:-(data)"
 
 
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
+
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
+
+#define CONFIG_CMD_FAT
+#define CONFIG_SUPPORT_VFAT
+
 #endif /* defined(CONFIG_CMD_IDE) */
 
 /*
@@ -478,10 +494,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
 
 /* Cache Configuration */
 #define CONFIG_SYS_DCACHE_SIZE         32768
@@ -496,14 +512,6 @@
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
@@ -515,8 +523,8 @@
 #define CONFIG_TIMESTAMP
 
 #define CONFIG_HOSTNAME                mpc5121ads
-#define CONFIG_BOOTFILE                mpc5121ads/uImage
-#define CONFIG_ROOTPATH                /opt/eldk/ppc_6xx
+#define CONFIG_BOOTFILE                "mpc5121ads/uImage"
+#define CONFIG_ROOTPATH                "/opt/eldk/ppc_6xx"
 
 #define CONFIG_LOADADDR                400000  /* default location for tftp and bootm */