mpc85xx: Add support for the P2020

[oweals/u-boot.git] / include / configs / mgsuvd.h

diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index b862130ae68f248ab9ab1b9d706973305abfbd9d..f53b6d38278365b39236212c2f3a662f5a28705b 100644 (file)
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -36,8 +36,8 @@
 #define CONFIG_MPC866          1       /* This is a MPC866 CPU         */
 #define CONFIG_MGSUVD          1       /* ...on a mgsuvd board */
 
-/* Do boardspecific init */
-#define CONFIG_BOARD_EARLY_INIT_R       1
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
 
 #define CONFIG_8xx_GCLK_FREQ           66000000
 
@@ -45,22 +45,13 @@
 #define CONFIG_SYS_SMC_DPMEM_OFFSET    0x1fc0
 #define CONFIG_8xx_CONS_SMC1   1       /* Console is on SMC1           */
 
-#define CONFIG_BAUDRATE                115200  /* console baudrate = 115kbps   */
-
-#define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_CPM_BOOTCOUNT_ADDR  0x1eb0  /* In case of SMC relocation, the
                                         * default value is not working */
 
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
-
-#define CONFIG_BOARD_TYPES     1       /* support board types          */
-
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
        "echo"
 
-#undef CONFIG_BOOTARGS
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                              \
        "netdev=eth0\0"                                                         \
        "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"     \
@@ -88,70 +79,11 @@
                "cp.b 200000 f0000000 ${filesize};"                             \
                "protect on f0000000 +${filesize}\0"                            \
        ""
-#define CONFIG_BOOTCOMMAND     "run flash_self"
-
-#define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
-
-#undef CONFIG_WATCHDOG                 /* watchdog disabled            */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 #undef CONFIG_RTC_MPC8xx               /* MPC866 does not support RTC  */
 
 #define        CONFIG_TIMESTAMP                /* but print image timestmps    */
 
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
-
-#define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#define CONFIG_HUSH_INIT_VAR   1
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
-#else
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size      */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
-
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -211,15 +143,6 @@
 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
 
-/*
- * How to get access to the slot ID.  Put this here to make it easy
- * to modify in a centralized location.  This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_SYS_SLOT_ID_BASE                CONFIG_SYS_PIGGY_BASE
-#define CONFIG_SYS_SLOT_ID_OFF         (0x07)  /* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK                (0x3f)  /* mask for slot ID bits */
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */