ARM: tegra: define CONFIG_SYS_BOOTMAPSZ

[oweals/u-boot.git] / include / configs / mcx.h

diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 9d552a0f5193b2f6339416682555057da91b2598..bf49cc138138c04ffaff06c90448de22cadbf103 100644 (file)
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -27,9 +27,11 @@
 #define CONFIG_OMAP                    /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                        /* which is a 34XX */
 #define CONFIG_OMAP3_MCX               /* working with mcx */
+#define CONFIG_OMAP_GPIO
 
 #define MACH_TYPE_MCX                  3656
 #define CONFIG_MACH_TYPE       MACH_TYPE_MCX
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_CACHELINE_SIZE      64
 
@@ -113,8 +115,7 @@
 #define CONFIG_USB_ULPI
 #define CONFIG_USB_ULPI_VIEWPORT_OMAP
 /*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       154
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO       152
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       57
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 
 /* commands to include */
@@ -140,6 +141,7 @@
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_GPIO
 
 #undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
 #undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
@@ -179,7 +181,7 @@
 #define CONFIG_JFFS2_PART_SIZE         0xf980000       /* sz of jffs2 part */
 
 /* Environment information */
-#define CONFIG_BOOTDELAY       10
+#define CONFIG_BOOTDELAY       3
 
 #define CONFIG_BOOTFILE                "uImage"
 
@@ -253,22 +255,28 @@
                "run nandargs; "                                        \
                "ubi part nand0,4;"                                     \
                "ubi readvol ${loadaddr} kernel;"                       \
-               "run addip addtty addmtd addfb addeth addmisc;"         \
+               "run addtty addmtd addfb addeth addmisc;"               \
                "bootm ${loadaddr}\0"                                   \
-       "swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\
-               "rootfstype=ubifs quiet loglevel=1 "                    \
-                       "consoleblank=0 ${swupdate_misc}\0"             \
+       "preboot=ubi part nand0,7;"                                     \
+               "ubi readvol ${loadaddr} splash;"                       \
+               "bmp display ${loadaddr};"                              \
+               "gpio set 55\0"                                         \
+       "swupdate_args=setenv bootargs root=/dev/ram "                  \
+               "quiet loglevel=1 "                                     \
+               "consoleblank=0 ${swupdate_misc}\0"                     \
        "swupdate=echo Running Sw-Update...;"                           \
                "if printenv mtdparts;then echo Starting SwUpdate...; " \
                "else mtdparts default;fi; "                            \
                "ubi part nand0,5;"                                     \
                "ubi readvol 0x82000000 kernel_recovery;"               \
+               "ubi part nand0,6;"                                     \
+               "ubi readvol 0x84000000 fs_recovery;"                   \
                "run swupdate_args; "                                   \
                "setenv bootargs ${bootargs} "                          \
                        "${mtdparts} "                                  \
                        "vram=6M omapfb.vram=1:2M,2:2M,3:2M "           \
                        "omapdss.def_disp=lcd;"                         \
-               "bootm ${loadaddr}\0"
+               "bootm 0x82000000 0x84000000\0"
 
 #define CONFIG_BOOTCOMMAND \
        "run nandboot"
@@ -299,6 +307,7 @@
 
 #define CONFIG_SYS_LOAD_ADDR           (OMAP34XX_SDRC_CS0) /* default load */
                                                                /* address */
+#define CONFIG_PREBOOT
 
 /*
  * AM3517 has 12 GP timers, they can be driven by the system clock
@@ -309,13 +318,6 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-
 /*
  * Physical Memory Map
  */
@@ -363,6 +365,8 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SOFTECC
 
@@ -423,4 +427,13 @@
 #define CONFIG_NET_RETRY_COUNT 10
 #endif
 
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_OMAP3
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
 #endif /* __CONFIG_H */