Rename some defines containing FAT in their name to be filesystem generic

[oweals/u-boot.git] / include / configs / mcx.h

diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index a2f7cf711d0b223b7d4eeee6d62734216e3e11c4..adaf44f68f633b49d8537c4e423d98a470fdc2bd 100644 (file)
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -13,7 +13,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_OMAP                    /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                        /* which is a 34XX */
 #define CONFIG_OMAP3_MCX               /* working with mcx */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
@@ -98,6 +97,7 @@
 
 /* EHCI */
 #define CONFIG_USB_STORAGE
+#define CONFIG_OMAP3_GPIO_2
 #define CONFIG_OMAP3_GPIO_5
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
@@ -263,10 +263,9 @@
                        "${mtdparts} "                                  \
                        "vram=6M omapfb.vram=1:2M,2:2M,3:2M "           \
                        "omapdss.def_disp=lcd;"                         \
-               "bootm 0x82000000 0x84000000\0"
-
-#define CONFIG_BOOTCOMMAND \
-       "run nandboot"
+               "bootm 0x82000000 0x84000000\0"                         \
+       "bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;" \
+               "then source 82000000;else run nandboot;fi\0"
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
@@ -316,12 +315,7 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-
 #define CONFIG_NAND_OMAP_GPMC
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
 #define CONFIG_ENV_IS_IN_NAND
 #define SMNAND_ENV_OFFSET              0x180000 /* environment starts here */
 
@@ -349,11 +343,9 @@
                                         GENERATED_GBL_DATA_SIZE)
 
 /* Defines for SPL */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_NAND_SOFTECC
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
@@ -380,8 +372,8 @@
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
@@ -395,6 +387,8 @@
                                         56, 57, 58, 59, 60, 61, 62, 63}
 #define CONFIG_SYS_NAND_ECCSIZE                256
 #define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_SW
+#define CONFIG_SPL_NAND_SOFTECC
 
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE