board/lx2160ardb: Add distro boot support

[oweals/u-boot.git] / include / configs / lx2160a_common.h

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 41931e5b5384d69a9fbf2e2a8f14ff5c1d7c4164..0e0e72d06baf2ad4c772f9023bad6ec876140399 100644 (file)
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -193,16 +193,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /* Initial environment variables */
-#define XSPI_NOR_BOOTCOMMAND   "fsl_mc apply dpl 0x20d00000;" \
-                               "sf probe 0:0;" \
-                               "sf read 0xa0000000 0x1000000 0x3000000;" \
-                               "bootm 0xa0000000"
-
-#define SD_BOOTCOMMAND         "mmc read 0xa0000000 0x6800 0xA0;" \
-                               "fsl_mc apply dpl 0xa0000000;" \
-                               "mmc read 0xb0000000 0x8000 0x1d000;" \
-                               "bootm 0xb0000000"
-
 #define XSPI_MC_INIT_CMD                       \
        "fsl_mc start mc 0x20a00000 0x20e00000\0"
 
@@ -211,4 +201,79 @@ unsigned long get_board_ddr_clk(void);
        "mmc read 0x80100000 0x7000 0x800;"     \
        "fsl_mc start mc 0x80000000 0x80100000\0"
 
+#define EXTRA_ENV_SETTINGS                     \
+       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+       "ramdisk_addr=0x800000\0"               \
+       "ramdisk_size=0x2000000\0"              \
+       "fdt_high=0xa0000000\0"                 \
+       "initrd_high=0xffffffffffffffff\0"      \
+       "fdt_addr=0x64f00000\0"                 \
+       "kernel_start=0x1000000\0"              \
+       "kernelheader_start=0x800000\0"         \
+       "scriptaddr=0x80000000\0"               \
+       "scripthdraddr=0x80080000\0"            \
+       "fdtheader_addr_r=0x80100000\0"         \
+       "kernelheader_addr_r=0x80200000\0"      \
+       "kernel_addr_r=0x81000000\0"            \
+       "kernelheader_size=0x40000\0"           \
+       "fdt_addr_r=0x90000000\0"               \
+       "load_addr=0xa0000000\0"                \
+       "kernel_size=0x2800000\0"               \
+       "kernel_addr_sd=0x8000\0"               \
+       "kernel_size_sd=0x1d000\0"              \
+       "console=ttyAMA0,38400n8\0"             \
+       BOOTENV                                 \
+       "mcmemsize=0x70000000\0"                \
+       XSPI_MC_INIT_CMD                                \
+       "boot_scripts=lx2160ardb_boot.scr\0"    \
+       "boot_script_hdr=hdr_lx2160ardb_bs.out\0"       \
+       "scan_dev_for_boot_part="               \
+               "part list ${devtype} ${devnum} devplist; "     \
+               "env exists devplist || setenv devplist 1; "    \
+               "for distro_bootpart in ${devplist}; do "       \
+                       "if fstype ${devtype} "                 \
+                               "${devnum}:${distro_bootpart} " \
+                               "bootfstype; then "             \
+                               "run scan_dev_for_boot; "       \
+                       "fi; "                                  \
+               "done\0"                                        \
+       "scan_dev_for_boot="                                    \
+               "echo Scanning ${devtype} "                     \
+                       "${devnum}:${distro_bootpart}...; "     \
+               "for prefix in ${boot_prefixes}; do "           \
+                       "run scan_dev_for_scripts; "            \
+               "done;\0"                                       \
+       "boot_a_script="                                        \
+               "load ${devtype} ${devnum}:${distro_bootpart} " \
+                       "${scriptaddr} ${prefix}${script}; "    \
+               "env exists secureboot && load ${devtype} "     \
+                       "${devnum}:${distro_bootpart} "         \
+                       "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+                       "&& esbc_validate ${scripthdraddr};"    \
+               "source ${scriptaddr}\0"
+
+#define XSPI_NOR_BOOTCOMMAND                                           \
+                       "env exists mcinitcmd && env exists secureboot "\
+                       "&& esbc_validate 0x20780000; "                 \
+                       "env exists mcinitcmd && "                      \
+                       "fsl_mc lazyapply dpl 0x20d00000; "             \
+                       "run distro_bootcmd;run xspi_bootcmd; "         \
+                       "env exists secureboot && esbc_halt;"
+
+#define SD_BOOTCOMMAND                                         \
+               "env exists mcinitcmd && mmcinfo; "             \
+               "mmc read 0x80001000 0x6800 0x800; "            \
+               "env exists mcinitcmd && env exists secureboot "        \
+               " && mmc read 0x80780000 0x3C00 0x10 "          \
+               "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
+               "&& fsl_mc lazyapply dpl 0x80001000;"           \
+               "run distro_bootcmd;run sd_bootcmd;"            \
+               "env exists secureboot && esbc_halt;"
+
+#define BOOT_TARGET_DEVICES(func) \
+       func(USB, usb, 0) \
+       func(MMC, mmc, 0) \
+       func(SCSI, scsi, 0)
+#include <config_distro_bootcmd.h>
+
 #endif /* __LX2_COMMON_H */