Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

[oweals/u-boot.git] / include / configs / lubbock.h

diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 208910eb9447f5b06b6eb3ed5a8c85a1d3319955..b7d53b65b787e62c10ca151165de0f993400f3c0 100644 (file)
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -40,27 +40,31 @@
 #ifdef CONFIG_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
-#define CONFIG_MMC             1
+#define CONFIG_MMC
 #define BOARD_LATE_INIT                1
 #define CONFIG_DOS_PARTITION
-
+#define        CONFIG_SYS_TEXT_BASE    0x0
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x0C000000
 
 /*
  * select serial console configuration
  */
+#define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART         1       /* we use FFUART on LUBBOCK */
 
 /* allow to overwrite serial and ethaddr */
@@ -83,7 +87,6 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
 
 
@@ -123,17 +126,19 @@
 #define CONFIG_SYS_MEMTEST_START       0xa0400000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
 
-#undef CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
 
-#define CONFIG_SYS_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CPUSPEED            0x161           /* set core clock to 400/200/100 MHz */
 
                                                /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE            0xF0000000
+#endif
 
 /*
  * Stack sizes
@@ -170,6 +175,9 @@
 
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define        CONFIG_SYS_INIT_SP_ADDR         (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
+
 #define FPGA_REGS_BASE_PHYSICAL 0x08000000
 
 /*
@@ -193,6 +201,9 @@
 
 #define CONFIG_SYS_PSSR_VAL            0x20
 
+#define        CONFIG_SYS_CCCR                 CCCR_L27|CCCR_M2|CCCR_N10
+#define        CONFIG_SYS_CKEN                 0x0
+
 /*
  * Memory settings
  */
@@ -203,6 +214,9 @@
 #define CONFIG_SYS_MDREFR_VAL          0x00018018
 #define CONFIG_SYS_MDMRS_VAL           0x00000000
 
+#define        CONFIG_SYS_FLYCNFG_VAL          0x00000000
+#define        CONFIG_SYS_SXCNFG_VAL           0x00000000
+
 /*
  * PCMCIA and CF Interfaces
  */