colibri_imx6: remove legacy sdboot wrapper

[oweals/u-boot.git] / include / configs / lsxl.h

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index 72e62658d0ccc7a201e134111706a148b3160b23..3ba5548f25ac0812803ee44eae88b29a3ef8a409 100644 (file)
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -29,7 +29,6 @@
 #define CONFIG_KW88F6281               /* SOC Name */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-#define CONFIG_SHOW_BOOT_PROGRESS
 
 #define CONFIG_KIRKWOOD_GPIO
 
@@ -76,9 +75,9 @@
        "kernel_addr=0x00800000\0"                                      \
        "ramdisk_addr=0x01000000\0"                                     \
        "fdt_addr=0x00ff0000\0"                                         \
-       "bootcmd_legacy=ide reset "                                     \
-               "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
-               "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+       "bootcmd_legacy=sata init "                                     \
+               "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
+               "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
                "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
        "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
                "&& tftpboot ${ramdisk_addr} initrd.img "               \
@@ -86,11 +85,11 @@
                "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
                "&& bootz ${kernel_addr} "                              \
                        "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
-       "bootcmd_hdd=ide reset "                                        \
-               "&& load ide ${hdpart} ${kernel_addr} /vmlinuz "        \
-               "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "    \
+       "bootcmd_hdd=sata init "                                        \
+               "&& load sata ${hdpart} ${kernel_addr} /vmlinuz "       \
+               "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img "   \
                "&& setenv ramdisk_len ${filesize} "                    \
-               "&& load ide ${hdpart} ${fdt_addr} /dtb "               \
+               "&& load sata ${hdpart} ${fdt_addr} /dtb "              \
                "&& bootz ${kernel_addr} "                              \
                        "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
        "bootcmd_usb=usb start "                                        \
@@ -131,13 +130,10 @@
 #undef CONFIG_RESET_PHY_R
 #endif /* CONFIG_CMD_NET */
 
-#ifdef CONFIG_IDE
-#undef CONFIG_SYS_IDE_MAXBUS
-#define CONFIG_SYS_IDE_MAXBUS          1
-#undef CONFIG_SYS_IDE_MAXDEVICE
-#define CONFIG_SYS_IDE_MAXDEVICE       1
-#define CONFIG_SYS_ATA_IDE0_OFFSET     MV_SATA_PORT0_OFFSET
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
 #define CONFIG_SYS_64BIT_LBA
+#define CONFIG_LBA48
 #endif
 
 #endif /* _CONFIG_LSXL_H */