arm: imx6: novena: Enable extfs support in SPL

[oweals/u-boot.git] / include / configs / ls2085ardb.h

diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h
index ed0ed7ab9912a2305809d0dd2dbfbc46228b1715..f95d7b27320f329ef908eae30ee9a6b78ce529f2 100644 (file)
--- a/include/configs/ls2085ardb.h
+++ b/include/configs/ls2085ardb.h
@@ -8,8 +8,6 @@
 #define __LS2_RDB_H
 
 #include "ls2085a_common.h"
-#define CONFIG_IDENT_STRING            " LS2085A-RDB"
-#define CONFIG_BOOTP_VCI_STRING                "U-boot.LS2085A-RDB"
 
 #undef CONFIG_CONS_INDEX
 #define CONFIG_CONS_INDEX       2
@@ -20,6 +18,7 @@
 unsigned long get_board_sys_clk(void);
 #endif
 
+#define CONFIG_SYS_FSL_CLK
 #define CONFIG_SYS_CLK_FREQ            get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ            133333333
 #define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ/4)
@@ -30,8 +29,8 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS1    0x51
 #define SPD_EEPROM_ADDRESS2    0x52
-#define SPD_EEPROM_ADDRESS3    0x54
-#define SPD_EEPROM_ADDRESS4    0x53    /* Board error */
+#define SPD_EEPROM_ADDRESS3    0x53
+#define SPD_EEPROM_ADDRESS4    0x54
 #define SPD_EEPROM_ADDRESS5    0x55
 #define SPD_EEPROM_ADDRESS6    0x56    /* dummy address */
 #define SPD_EEPROM_ADDRESS     SPD_EEPROM_ADDRESS1
@@ -235,16 +234,26 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_LS_MC_DPC_ADDR      0x580800000ULL
 
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
+#define CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
+#define CONFIG_SYS_LS_MC_AIOP_IMG_ADDR 0x580900000ULL
 
 /*
  * I2C
  */
-#define I2C_MUX_PCA_ADDR               0x77
-#define I2C_MUX_PCA_ADDR_PRI           0x77 /* Primary Mux*/
+#define I2C_MUX_PCA_ADDR               0x75
+#define I2C_MUX_PCA_ADDR_PRI           0x75 /* Primary Mux*/
 
 /* I2C bus multiplexer */
 #define I2C_MUX_CH_DEFAULT      0x8
 
+/* SPI */
+#ifdef CONFIG_FSL_DSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_BAR
+#endif
+
 /*
  * RTC configuration
  */
@@ -269,7 +278,6 @@ unsigned long get_board_sys_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_PNP
-#define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
@@ -287,6 +295,19 @@ unsigned long get_board_sys_clk(void);
 
 #define CONFIG_MISC_INIT_R
 
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
@@ -299,11 +320,18 @@ unsigned long get_board_sys_clk(void);
        "initrd_high=0xffffffffffffffff\0"      \
        "kernel_start=0x581100000\0"            \
        "kernel_load=0xa0000000\0"              \
-       "kernel_size=0x1000000\0"
+       "kernel_size=0x2800000\0"
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTARGS                "console=ttyS1,115200 root=/dev/ram0 " \
+                               "earlycon=uart8250,mmio,0x21c0600,115200 " \
+                               "ramdisk_size=0x2000000 default_hugepagesz=2m" \
+                               " hugepagesz=2m hugepages=16"
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_AQUANTIA
 #define CONFIG_PHY_CORTINA
 #define CONFIG_PHYLIB
 #define        CONFIG_SYS_CORTINA_FW_IN_NOR
@@ -322,6 +350,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_MII
 #define CONFIG_ETHPRIME                "DPNI1"
 #define CONFIG_PHY_GIGE
+#define CONFIG_PHY_AQUANTIA
 #endif
 
 #endif /* __LS2_RDB_H */