#define __LS2_RDB_H
#include "ls2085a_common.h"
-#include <config_cmd_default.h>
-
-#define CONFIG_IDENT_STRING " LS2085A-RDB"
-#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-RDB"
#undef CONFIG_CONS_INDEX
#define CONFIG_CONS_INDEX 2
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#define SPD_EEPROM_ADDRESS1 0x51
#define SPD_EEPROM_ADDRESS2 0x52
-#define SPD_EEPROM_ADDRESS3 0x54
-#define SPD_EEPROM_ADDRESS4 0x53 /* Board error */
+#define SPD_EEPROM_ADDRESS3 0x53
+#define SPD_EEPROM_ADDRESS4 0x54
#define SPD_EEPROM_ADDRESS5 0x55
#define SPD_EEPROM_ADDRESS6 0x56 /* dummy address */
#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1
#define QIXIS_LBMAP_SHIFT 0
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_LBMAP_NAND 0x09
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RST_CTL_RESET_EN 0x30
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_RCW_SRC_NAND 0x119
#define QIXIS_RST_FORCE_MEM 0x01
#define CONFIG_SYS_CSPR3_EXT (0x0)
FTIM2_GPCM_TWP(0x3E))
#define CONFIG_SYS_CS3_FTIM3 0x0
+#if defined(CONFIG_SPL) && defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR_EARLY
+#define CONFIG_SYS_CSPR2_FINAL CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET (2048 * 1024)
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SPL_PAD_TO 0x80000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (1024 * 1024)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 * 1024)
+#else
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE 0x2000
+#endif
+
/* Debug Server firmware */
#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
#define CONFIG_SYS_LS_MC_DPC_ADDR 0x580800000ULL
#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
+#define CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
+#define CONFIG_SYS_LS_MC_AIOP_IMG_ADDR 0x580900000ULL
/*
* I2C
*/
-#define I2C_MUX_PCA_ADDR 0x77
-#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/
+#define I2C_MUX_PCA_ADDR 0x75
+#define I2C_MUX_PCA_ADDR_PRI 0x75 /* Primary Mux*/
/* I2C bus multiplexer */
#define I2C_MUX_CH_DEFAULT 0x8
+/* SPI */
+#ifdef CONFIG_FSL_DSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_BAR
+#endif
+
/*
* RTC configuration
*/
#define RTC
#define CONFIG_RTC_DS3231 1
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_CMD_DATE
/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000)
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_SIZE 0x2000
-
#define CONFIG_FSL_MEMAC
#define CONFIG_PCI /* Enable PCIE */
#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
#ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP
-#define CONFIG_E1000
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
#endif
+/* MMC */
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+#define CONFIG_MISC_INIT_R
+
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
/* Initial environment variables */
#undef CONFIG_EXTRA_ENV_SETTINGS
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0x581100000\0" \
"kernel_load=0xa0000000\0" \
- "kernel_size=0x1000000\0"
+ "kernel_size=0x2800000\0"
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
+ "earlycon=uart8250,mmio,0x21c0600,115200 " \
+ "ramdisk_size=0x2000000 default_hugepagesz=2m" \
+ " hugepagesz=2m hugepages=16"
+
+/* MAC/PHY configuration */
+#ifdef CONFIG_FSL_MC_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_CORTINA
+#define CONFIG_PHYLIB
+#define CONFIG_SYS_CORTINA_FW_IN_NOR
+#define CONFIG_CORTINA_FW_ADDR 0x581000000
+#define CONFIG_CORTINA_FW_LENGTH 0x40000
+
+#define CORTINA_PHY_ADDR1 0x10
+#define CORTINA_PHY_ADDR2 0x11
+#define CORTINA_PHY_ADDR3 0x12
+#define CORTINA_PHY_ADDR4 0x13
+#define AQ_PHY_ADDR1 0x00
+#define AQ_PHY_ADDR2 0x01
+#define AQ_PHY_ADDR3 0x02
+#define AQ_PHY_ADDR4 0x03
+
+#define CONFIG_MII
+#define CONFIG_ETHPRIME "DPNI1"
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHY_AQUANTIA
+#endif
#endif /* __LS2_RDB_H */
projects / oweals / u-boot.git / blobdiff