mx6_common: Do not select esdhc DDR mode for all boards

[oweals/u-boot.git] / include / configs / ls2085a_common.h

diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index 55e7307cbc284396dbbeae745130c14a8938ca9c..17a1cde0399049001b19d208ccf4106d0ce1f4f1 100644 (file)
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -27,9 +27,6 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F      1
 
-#define CONFIG_IDENT_STRING            " LS2085A-EMU"
-#define CONFIG_BOOTP_VCI_STRING                "U-boot.LS2085A-EMU"
-
 /* Flat Device Tree Definitions */
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
@@ -210,12 +207,10 @@
 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE   (512UL * 1024 * 1024)
 #define CONFIG_SYS_LS_MC_FW_IN_NOR
 #define CONFIG_SYS_LS_MC_FW_ADDR       0x580200000ULL
-/* TODO Actual FW length needs to be determined at runtime from FW header */
-#define CONFIG_SYS_LS_MC_FW_LENGTH     (4U * 1024 * 1024)
 #define CONFIG_SYS_LS_MC_DPL_IN_NOR
 #define CONFIG_SYS_LS_MC_DPL_ADDR      0x5806C0000ULL
 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */
-#define CONFIG_SYS_LS_MC_DPL_LENGTH    4096
+#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH        (256 * 1024)
 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET    0xe00000
 
 /* Carve the MC private DRAM block from the end of DRAM */
@@ -249,7 +244,8 @@
 /* Physical Memory Map */
 /* fixme: these need to be checked against the board */
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
-#define CONFIG_SYS_CLK_FREQ    133333333
+#define CONFIG_SYS_CLK_FREQ    100000000
+#define CONFIG_DDR_CLK_FREQ    133333333
 
 
 #define CONFIG_NR_DRAM_BANKS           3
@@ -269,14 +265,14 @@
        "fdt_high=0xffffffffffffffff\0"         \
        "initrd_high=0xffffffffffffffff\0"      \
        "kernel_start=0x581200000\0"            \
-       "kernel_load=0x806f0000\0"              \
+       "kernel_load=0xa0000000\0"              \
        "kernel_size=0x1000000\0"               \
        "console=ttyAMA0,38400n8\0"
 
-#define CONFIG_BOOTARGS                        "console=ttyS1,115200 root=/dev/ram0 " \
-                                       "earlyprintk=uart8250-8bit,0x21c0600 " \
-                                       "default_hugepagesz=2m hugepagesz=2m " \
-                                       "hugepages=16"
+#define CONFIG_BOOTARGS                "console=ttyS1,115200 root=/dev/ram0 " \
+                               "earlycon=uart8250,mmio,0x21c0600,115200 " \
+                               "default_hugepagesz=2m hugepagesz=2m " \
+                               "hugepages=16"
 #define CONFIG_BOOTCOMMAND             "cp.b $kernel_start $kernel_load "     \
                                        "$kernel_size && bootm $kernel_load"
 #define CONFIG_BOOTDELAY               1