env: Finish migration of common ENV options

[oweals/u-boot.git] / include / configs / ls1046ardb.h

diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 793e67506dc2ebb19ea99527a51aa856264f2bd5..efedfd59236c09d903021a21d4ab6df457d25334 100644 (file)
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -1,7 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
- *
- * SPDX-License-Identifier:    GPL-2.0+
+ * Copyright 2019 NXP
  */
 
 #ifndef __LS1046ARDB_H__
@@ -9,22 +9,14 @@
 
 #include "ls1046a_common.h"
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_TEXT_BASE           0x82000000
-#else
-#define CONFIG_SYS_TEXT_BASE           0x40100000
-#endif
-
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_DDR_CLK_FREQ            100000000
 
 #define CONFIG_LAYERSCAPE_NS_ACCESS
-#define CONFIG_MISC_INIT_R
 
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
-#define CONFIG_NR_DRAM_BANKS           2
 
 #define CONFIG_DDR_SPD
 #define SPD_EEPROM_ADDRESS             0x51
@@ -33,22 +25,22 @@
 #define CONFIG_DDR_ECC
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
-#define CONFIG_FSL_DDR_BIST    /* enable built-in memory test */
-#ifndef CONFIG_SPL
-#define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
-#endif
-
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
-#endif
 
 #ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
 #ifdef CONFIG_EMMC_BOOT
 #define CONFIG_SYS_FSL_PBL_RCW \
        board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
 #else
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
 #endif
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_SYS_FSL_PBL_RCW \
+       board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg
+#define CONFIG_SYS_FSL_PBL_PBI \
+       board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg
+#define CONFIG_SYS_UBOOT_BASE          0x40100000
+#define CONFIG_SYS_SPL_ARGS_ADDR       0x90000000
 #endif
 
 #ifndef SPL_NO_IFC
@@ -165,14 +157,14 @@
 #define CONFIG_ENV_OVERWRITE
 #endif
 
-#if defined(CONFIG_SD_BOOT)
+#ifdef CONFIG_TFABOOT
 #define CONFIG_SYS_MMC_ENV_DEV         0
-#define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
-#define CONFIG_ENV_SIZE                        0x2000
+
+#define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
 #else
-#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
-#define CONFIG_ENV_SECT_SIZE           0x40000         /* 256KB */
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#endif
 #endif
 
 #define AQR105_IRQ_MASK                        0x80000000
@@ -184,9 +176,6 @@
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
-#define CONFIG_PHY_AQUANTIA
-#define CONFIG_PHYLIB_10G
 #define RGMII_PHY1_ADDR                        0x1
 #define RGMII_PHY2_ADDR                        0x2
 
@@ -211,20 +200,14 @@
 #endif
 #endif
 
-/* SATA */
-#ifndef SPL_NO_SATA
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
 #ifndef SPL_NO_MISC
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "  \
+                          "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "   \
+                          "env exists secureboot && esbc_halt;"
+#else
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "    \
                           "env exists secureboot && esbc_halt;;"
@@ -233,6 +216,7 @@
                           "env exists secureboot && esbc_halt;"
 #endif
 #endif
+#endif
 
 #include <asm/fsl_secure_boot.h>