Convert CONFIG_BZIP2 et al to Kconfig

[oweals/u-boot.git] / include / configs / ls1046aqds.h

diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 6e36baf4ca581ceb0bda761f0344cacdb1a5b591..969d2c540bafccdbc6ae2ea0924b2918e08126b0 100644 (file)
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -39,27 +39,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPI_FLASH_STMICRO       /* cs0 */
 #define CONFIG_SPI_FLASH_SST           /* cs1 */
 #define CONFIG_SPI_FLASH_EON           /* cs2 */
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_SF_DEFAULT_BUS          1
-#define CONFIG_SF_DEFAULT_CS           0
-#endif
-#endif
-
-/* QSPI */
-#if defined(CONFIG_TFABOOT) || \
-       defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
-#define FSL_QSPI_FLASH_SIZE            (1 << 24)
-#define FSL_QSPI_FLASH_NUM             2
-#endif
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#define CONFIG_PHYLIB_10G
 #define RGMII_PHY1_ADDR                0x1
 #define RGMII_PHY2_ADDR                0x2
 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
@@ -417,9 +399,6 @@ unsigned long get_board_ddr_clk(void);
  * Miscellaneous configurable options
  */
 
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
-
 #define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_SYS_INIT_SP_OFFSET \
@@ -430,51 +409,33 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Environment
  */
-#define CONFIG_ENV_OVERWRITE
-
-#ifdef CONFIG_TFABOOT
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              0x500000        /* 5MB */
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x500000)
-#define CONFIG_ENV_SECT_SIZE           0x20000
-#else
-#ifdef CONFIG_NAND_BOOT
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#define CONFIG_ENV_SIZE                        0x2000
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
-#define CONFIG_ENV_SECT_SIZE           0x10000
-#else
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
-#define CONFIG_ENV_SECT_SIZE           0x20000
-#define CONFIG_ENV_SIZE                        0x20000
-#endif
-#endif
-
 #define CONFIG_CMDLINE_TAG
 
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
-#define QSPI_NOR_BOOTCOMMAND           "sf probe && sf read $kernel_load "    \
-                                       "e0000 f00000 && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND            "cp.b $kernel_start $kernel_load "     \
-                                       "$kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND         "mmc info; mmc read $kernel_load"     \
-                                       "$kernel_addr_sd $kernel_size_sd && bootm $kernel_load"
+#define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "  \
+                          "env exists secureboot && esbc_halt;;"
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd"     \
+                          "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "    \
+                          "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
+                          "env exists secureboot && esbc_halt;;"
 #else
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND             "sf probe && sf read $kernel_load "    \
-                                       "e0000 f00000 && bootm $kernel_load"
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
+                          "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "    \
+                          "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "      \
+                          "env exists secureboot && esbc_halt;;"
 #else
-#define CONFIG_BOOTCOMMAND             "cp.b $kernel_start $kernel_load "     \
-                                       "$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
+                          "env exists secureboot && esbc_halt;;"
 #endif
 #endif