imx6: aristainetos: readd aristainetos 2b board

[oweals/u-boot.git] / include / configs / ls1043a_common.h

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 2e9d47648323f14a85df079f282dc1223cdd2b3e..bf24d4036d2a0b809cc226b5491ce3b2df2f9b3e 100644 (file)
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -64,7 +64,6 @@
 /* SD boot SPL */
 #ifdef CONFIG_SD_BOOT
 
-#define CONFIG_SPL_TEXT_BASE           0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x17000
 #define CONFIG_SPL_STACK               0x1001e000
 #define CONFIG_SPL_PAD_TO              0x1d000
@@ -75,7 +74,7 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x8f000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE                         (16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -86,13 +85,12 @@
 #define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN         0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 #endif
 
 /* NAND SPL */
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_TEXT_BASE           0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x1a000
 #define CONFIG_SPL_STACK               0x1001d000
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
@@ -102,9 +100,9 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE                         (16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_U_BOOT_HDR_SIZE
 /*
@@ -190,7 +188,6 @@
 #else
 #ifdef CONFIG_NAND_BOOT
 /* Store Fman ucode at offeset 0x900000(72 blocks). */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_FMAN_FW_ADDR                (72 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SD_BOOT)
 /*
@@ -198,14 +195,11 @@
  * about 1MB (2040 blocks), Env is stored after the image, and the env size is
  * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800).
  */
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR                (512 * 0x4800)
 #define CONFIG_SYS_QE_FW_ADDR          (512 * 0x4A00)
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR                0x40900000
 #else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 /* FMan fireware Pre-load address */
 #define CONFIG_SYS_FMAN_FW_ADDR                0x60900000
 #define CONFIG_SYS_QE_FW_ADDR          0x60940000
@@ -275,13 +269,14 @@
                        "${scriptaddr} ${prefix}${script}; "    \
                "env exists secureboot && load ${devtype} "     \
                        "${devnum}:${distro_bootpart} "         \
-                       "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+                       "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
+                       "env exists secureboot "        \
                        "&& esbc_validate ${scripthdraddr};"    \
                "source ${scriptaddr}\0"                        \
        "qspi_bootcmd=echo Trying load from qspi..;"    \
                "sf probe && sf read $load_addr "       \
-               "$kernel_addr $kernel_size; env exists secureboot "     \
-               "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
+               "$kernel_start $kernel_size; env exists secureboot "    \
+               "&& sf read $kernelheader_addr_r $kernelheader_start "  \
                "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
                "bootm $load_addr#$board\0"     \
        "nor_bootcmd=echo Trying load from nor..;"      \