armv8/ls1043a: Enable secondary cores

[oweals/u-boot.git] / include / configs / ls1043a_common.h

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index f866bed2a70777c001a7c1656624143c937fefc4..1f22dd34df4f18d6f7668423b4635868baf05239 100644 (file)
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -11,6 +11,7 @@
 #define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_FSL_LSCH2
 #define CONFIG_LS1043A
+#define CONFIG_MP
 #define CONFIG_SYS_FSL_CLK
 #define CONFIG_GICV2
 
@@ -44,6 +45,8 @@
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
+#define CPU_RELEASE_ADDR               secondary_boot_func
+
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              25000000        /* 25MHz */
 
@@ -60,6 +63,63 @@
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
+/* SD boot SPL */
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0xf0
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x500
+
+#define CONFIG_SPL_TEXT_BASE           0x10000000
+#define CONFIG_SPL_MAX_SIZE            0x1d000
+#define CONFIG_SPL_STACK               0x1001e000
+#define CONFIG_SPL_PAD_TO              0x1d000
+
+#define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE + \
+                                       CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
+#define CONFIG_SPL_BSS_START_ADDR      0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
+#define CONFIG_SYS_MONITOR_LEN         0xa0000
+#endif
+
+/* NAND SPL */
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SPL_PBL_PAD
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_TEXT_BASE           0x10000000
+#define CONFIG_SPL_MAX_SIZE            0x1a000
+#define CONFIG_SPL_STACK               0x1001d000
+#define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
+#define CONFIG_SPL_BSS_START_ADDR      0x80100000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
+#define CONFIG_SYS_MONITOR_LEN         0xa0000
+#endif
+
 /* IFC */
 #define CONFIG_FSL_IFC
 /*
@@ -126,6 +186,29 @@
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_PING
 
+/*  MMC  */
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* FMan ucode */
+#define CONFIG_SYS_DPAA_FMAN
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_SYS_FM_MURAM_SIZE       0x60000
+
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+/* FMan fireware Pre-load address */
+#define CONFIG_SYS_FMAN_FW_ADDR                0x60300000
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
+#define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif
+
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 #define CONFIG_ARCH_EARLY_INIT_R