imx: cx9020: use distro boot

[oweals/u-boot.git] / include / configs / ls1028a_common.h

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 896d7a33b52fdca2552148572ea3bbee75e19667..4bd510d42eb0145715cf4da606167932f1ed3264 100644 (file)
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -42,7 +42,9 @@
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2048 * 1024)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#endif
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX       1
@@ -67,6 +69,7 @@
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
+       func(MMC, mmc, 1) \
        func(USB, usb, 0)
 #include <config_distro_bootcmd.h>
 
@@ -127,25 +130,46 @@
                        "${scripthdraddr} ${prefix}${boot_script_hdr} " \
                        "&& esbc_validate ${scripthdraddr};"    \
                "source ${scriptaddr}\0"          \
-       "sd_bootcmd=echo Trying load from SD ..;"       \
+       "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+               "sf probe 0:0 && sf read $load_addr " \
+               "$kernel_start $kernel_size ; env exists secureboot &&" \
+               "sf read $kernelheader_addr_r $kernelheader_start " \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+               " bootm $load_addr#$board\0" \
+       "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+               "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+               "&& hdp load $load_addr 0x2000\0"                       \
+       "sd_bootcmd=echo Trying load from SD ...;" \
                "mmcinfo; mmc read $load_addr "         \
                "$kernel_addr_sd $kernel_size_sd && "   \
                "env exists secureboot && mmc read $kernelheader_addr_r " \
                "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
                " && esbc_validate ${kernelheader_addr_r};"     \
                "bootm $load_addr#$board\0"             \
+       "sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+               "mmcinfo;mmc read $load_addr 0x4a00 0x200 "             \
+               "&& hdp load $load_addr 0x2000\0"       \
        "emmc_bootcmd=echo Trying load from EMMC ..;"   \
                "mmcinfo; mmc dev 1; mmc read $load_addr "              \
                "$kernel_addr_sd $kernel_size_sd && "   \
                "env exists secureboot && mmc read $kernelheader_addr_r " \
                "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
                " && esbc_validate ${kernelheader_addr_r};"     \
-               "bootm $load_addr#$board\0"
+               "bootm $load_addr#$board\0"                     \
+       "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+               "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "   \
+               "&& hdp load $load_addr 0x2000\0"
 
 #undef CONFIG_BOOTCOMMAND
 
+#define XSPI_NOR_BOOTCOMMAND   \
+       "run xspi_hdploadcmd; run distro_bootcmd; run xspi_bootcmd; " \
+       "env exists secureboot && esbc_halt;;"
 #define SD_BOOTCOMMAND \
-       "run distro_bootcmd;run sd_bootcmd; " \
+       "run sd_hdploadcmd; run distro_bootcmd;run sd_bootcmd; " \
+       "env exists secureboot && esbc_halt;"
+#define SD2_BOOTCOMMAND        \
+       "run emmc_hdploadcmd; run distro_bootcmd;run emmc_bootcmd; " \
        "env exists secureboot && esbc_halt;"
 
 /* Monitor Command Prompt */
@@ -169,11 +193,7 @@
 
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define OCRAM_NONSECURE_SIZE           0x00010000
-#define CONFIG_ENV_OFFSET              0x500000        /* 5MB */
 #define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
-#define CONFIG_ENV_ADDR        CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET
-#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_SECT_SIZE           0x40000
 
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 
@@ -190,8 +210,12 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #include <asm/fsl_secure_boot.h>
 #endif
 
+/* Ethernet */
+/* smallest ENETC BD ring has 8 entries */
+#define CONFIG_SYS_RX_ETH_BUFFER               8
+
 #endif /* __L1028A_COMMON_H */