apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / ls1021aiot.h

diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index d6839c09160a29089a14fa8706500c72ada9dcb9..ee570bc1a9cf2d648a342d0a6f77259d7faacd8e 100644 (file)
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -19,21 +18,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       OCRAM_SIZE
 
-/* XHCI Support - enabled by default */
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_MAX_CONTROLLER_COUNT                1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
-#endif
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
-#endif
-
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_DDR_CLK_FREQ            100000000
 
@@ -76,23 +60,18 @@
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_FSL_PBL_RCW \
        board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0xe8
 
-#define CONFIG_SPL_TEXT_BASE   0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x1a000
 #define CONFIG_SPL_STACK               0x1001d000
 #define CONFIG_SPL_PAD_TO              0x1c000
-#define CONFIG_SYS_TEXT_BASE   0x82000000
 
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE + \
                CONFIG_SYS_MONITOR_LEN)
@@ -102,19 +81,14 @@
 #define CONFIG_SYS_MONITOR_LEN         0x80000
 #endif
 
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SYS_TEXT_BASE           0x40010000
-#endif
-
-#define CONFIG_NR_DRAM_BANKS           1
-
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
+#define CONFIG_CHIP_SELECTS_PER_CTRL   4
+
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -140,12 +114,8 @@
  * MMC
  */
 #define CONFIG_CMD_MMC
-#define CONFIG_FSL_ESDHC
 
 /* SATA */
-#define CONFIG_CMD_SCSI
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
 #define PCI_DEVICE_ID_FREESCALE_AHCI   0x0440
@@ -158,8 +128,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                CONFIG_SYS_SCSI_MAX_LUN)
 
-#define CONFIG_CMD_FAT
-
 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SPI_FLASH_SPANSION
@@ -168,7 +136,6 @@
 #define QSPI0_AMBA_BASE                        0x40000000
 #define FSL_QSPI_FLASH_SIZE            (1 << 24)
 #define FSL_QSPI_FLASH_NUM             2
-#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_SPI_FLASH_SPANSION
 #endif
 
@@ -181,10 +148,8 @@
 /*
  * eTSEC
  */
-#define CONFIG_TSEC_ENET
 
 #ifdef CONFIG_TSEC_ENET
-#define CONFIG_MII
 #define CONFIG_MII_DEFAULT_TSEC                1
 #define CONFIG_TSEC1                   1
 #define CONFIG_TSEC1_NAME              "eTSEC1"
@@ -202,8 +167,6 @@
 
 #define CONFIG_ETHPRIME                        "eTSEC2"
 
-#define CONFIG_PHY_GIGE
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 #define CONFIG_HAS_ETH0
@@ -219,19 +182,11 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 
 #define CONFIG_CMDLINE_TAG
-#define CONFIG_CMDLINE_EDITING
-
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
-#undef CONFIG_CMD_IMLS
-#endif
 
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
@@ -251,15 +206,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              \
-       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MEMINFO
 
@@ -289,11 +235,9 @@
 
 #if defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET              0x100000
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV 0
 #define CONFIG_ENV_SIZE                        0x2000
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              0x100000
 #define CONFIG_ENV_SECT_SIZE   0x10000
@@ -301,9 +245,6 @@
 
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
-#define CONFIG_CMD_BOOTZ
-
-#define CONFIG_MISC_INIT_R
 
 #include <asm/fsl_secure_boot.h>