Merge branch '2020-05-07-more-kconfig-migrations'

[oweals/u-boot.git] / include / configs / ls1012aqds.h

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 5b8500b91baaa0eeb748f181fe2c9366898baa11..99840dcfc4fc779f9a5bcdeb35d1d8326f694f9a 100644 (file)
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS1012AQDS_H__
@@ -12,12 +11,8 @@
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
-#define CONFIG_NR_DRAM_BANKS           2
 #define CONFIG_SYS_SDRAM_SIZE          0x40000000
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 /*
  * QIXIS Definitions
@@ -77,9 +72,7 @@
 
 /* DSPI */
 #define CONFIG_FSL_DSPI1
-#define CONFIG_DEFAULT_SPI_BUS 1
 
-#define CONFIG_CMD_SPI
 #define MMAP_DSPI          DSPI1_BASE_ADDR
 
 #define CONFIG_SYS_DSPI_CTAR0   1
@@ -102,62 +95,16 @@
                                DSPI_CTAR_DT(0))
 #define CONFIG_SPI_FLASH_EON /* cs3 */
 
-#define CONFIG_SF_DEFAULT_SPEED      10000000
-#define CONFIG_SF_DEFAULT_MODE       SPI_MODE_0
-#define CONFIG_SF_DEFAULT_BUS        1
-#define CONFIG_SF_DEFAULT_CS         0
-
-/*
-* USB
-*/
-/* EHCI Support - disbaled by default */
-/*#define CONFIG_HAS_FSL_DR_USB*/
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
-/*XHCI Support - enabled by default*/
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#endif
-
 /*  MMC  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
-/* SATA */
-#define CONFIG_LIBATA
-#define        CONFIG_SCSI
-#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-
-#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
 
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
-
-#define CONFIG_MISC_INIT_R
 
+#include <asm/fsl_secure_boot.h>
 #endif /* __LS1012AQDS_H__ */