board: ls1012a: FRWY-LS1012A board support

[oweals/u-boot.git] / include / configs / ls1012a_common.h

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index db920bc5ccac4a20c5ddf386569bb535a6eaac8e..787adbc3823fdee14928ccf1ed6d7a0abb657939 100644 (file)
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS1012A_COMMON_H
@@ -13,12 +12,6 @@
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-#define CONFIG_SYS_TEXT_BASE           0x40100000
-
 #define CONFIG_SYS_CLK_FREQ            125000000
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -69,13 +62,19 @@
 #define CONFIG_ENV_SECT_SIZE           0x40000
 #endif
 
+/* SATA */
+#define CONFIG_SCSI_AHCI_PLAT
+
+#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
+#define CONFIG_SYS_SCSI_MAX_LUN                        1
+#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                               CONFIG_SYS_SCSI_MAX_LUN)
+
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
@@ -87,9 +86,9 @@
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-#include <config_distro_defaults.h>
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
+       func(SCSI, scsi, 0) \
        func(MMC, mmc, 0) \
        func(USB, usb, 0)
 #include <config_distro_bootcmd.h>
@@ -107,17 +106,14 @@
        "kernel_size=0x2800000\0"               \
 
 #undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND             "sf probe 0:0; sf read $kernel_load "\
-                                       "$kernel_start $kernel_size && "\
-                                       "bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND     "pfe stop; sf probe 0:0; sf read $kernel_load "\
+                               "$kernel_start $kernel_size && "\
+                               "bootm $kernel_load"
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
-#define CONFIG_PANIC_HANG
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 #include <asm/arch/soc.h>