Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

[oweals/u-boot.git] / include / configs / km / km_arm.h

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 7eb5cd49f6baa9b2e08ceb60b978f732369e3ad0..700124c0c43281881210e665579d607608de0ad9 100644 (file)
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -36,6 +36,9 @@
 #ifndef _CONFIG_KM_ARM_H
 #define _CONFIG_KM_ARM_H
 
+/* We got removed from Linux mach-types.h */
+#define MACH_TYPE_KM_KIRKWOOD          2255
+
 /*
  * High Level Configuration Options (easy to change)
  */
@@ -45,6 +48,8 @@
 #define CONFIG_KW88F6281               /* SOC Name */
 #define CONFIG_MACH_KM_KIRKWOOD                /* Machine type */
 
+#define CONFIG_MACH_TYPE       MACH_TYPE_KM_KIRKWOOD
+
 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"
 
@@ -54,7 +59,7 @@
 
 #include "asm/arch/config.h"
 
-#define CONFIG_SYS_TEXT_BASE   0x04000000      /* code address after reloc */
+#define CONFIG_SYS_TEXT_BASE   0x07d00000      /* code address before reloc */
 #define CONFIG_SYS_MEMTEST_START 0x00400000    /* 4M */
 #define CONFIG_SYS_MEMTEST_END 0x007fffff      /*(_8M -1) */
 #define CONFIG_SYS_LOAD_ADDR   0x00800000      /* default load adr- 8M */
@@ -69,16 +74,16 @@
 
 /* architecture specific default bootargs */
 #define CONFIG_KM_DEF_BOOT_ARGS_CPU                                    \
-               "bootcountaddr=${bootcountaddr} ${mtdparts}"
+               "bootcountaddr=${bootcountaddr} ${mtdparts}"            \
+               " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
 
 #define CONFIG_KM_DEF_ENV_CPU                                          \
        "boot=bootm ${load_addr_r} - -\0"                               \
        "cramfsloadfdt=true\0"                                          \
+       "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.kwb\0"                  \
        CONFIG_KM_DEF_ENV_UPDATE                                        \
        ""
 
-#define CONFIG_KM_ARCH_DBG_FILE                "scripts/debug-arm-env.txt"
-
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
 #define CONFIG_MISC_INIT_R
 
@@ -154,7 +159,6 @@
  * Ethernet Driver configuration
  */
 #define CONFIG_NETCONSOLE      /* include NetConsole support   */
-#define CONFIG_NET_MULTI       /* specify more that one ports available */
 #define CONFIG_MII             /* expose smi ove miiphy interface */
 #define CONFIG_MVGBE           /* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
@@ -196,6 +200,12 @@ int get_scl(void);
 
 #endif
 
+/* EEprom support 24C128, 24C256 valid for environment eeprom */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      6 /* 64 Byte write page */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
@@ -243,14 +253,13 @@ int get_scl(void);
                " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && "            \
                "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)        \
                " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"       \
-       "rootpath=/opt/eldk/arm\0"                                      \
+       "arch=arm\0"                                                    \
        "EEprom_ivm=" KM_IVM_BUS "\0"                                   \
        ""
 
 #if defined(CONFIG_SYS_NO_FLASH)
 #define CONFIG_KM_UBI_PARTITION_NAME   "ubi0"
 #undef CONFIG_FLASH_CFI_MTD
-#undef CONFIG_CMD_JFFS2
 #undef CONFIG_JFFS2_CMDLINE
 #endif
 
@@ -267,4 +276,10 @@ int get_scl(void);
 /* address for the bootcount (taken from end of RAM) */
 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
 
+/* enable POST tests */
+#define CONFIG_POST    (CONFIG_SYS_POST_MEM_REGIONS)
+#define CONFIG_POST_SKIP_ENV_FLAGS
+#define CONFIG_POST_EXTERNAL_WORD_FUNCS
+#define CONFIG_CMD_DIAG
+
 #endif /* _CONFIG_KM_ARM_H */