#ifndef __CONFIG_IBF_DSP561__H__
#define __CONFIG_IBF_DSP561__H__
-#include <asm/blackfin-config-pre.h>
+#include <asm/config-pre.h>
/*
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
+/*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK 1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AX88180 1
+#define AX88180_BASE 0x2c000000
+#define CONFIG_HOSTNAME ibf-dsp561
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
+
+
/*
* Flash Settings
*/
#define CONFIG_SYS_MAX_FLASH_SECT 135 /* max number of sectors on one chip */
/* The BF561-EZKIT uses a top boot flash */
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0x20004000
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_OFFSET 0x4000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
#define ENV_IS_EMBEDDED
#else
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text*);
#endif
* I2C Settings
*/
#define CONFIG_SOFT_I2C 1
-#define PF_SCL 0x1/*PF0*/
-#define PF_SDA 0x2/*PF1*/
-
-#ifdef CONFIG_SOFT_I2C
-#define I2C_INIT do { *pFIO0_DIR |= PF_SCL; SSYNC(); } while (0)
-#define I2C_ACTIVE do { *pFIO0_DIR |= PF_SDA; *pFIO0_INEN &= ~PF_SDA; SSYNC(); } while (0)
-#define I2C_TRISTATE do { *pFIO0_DIR &= ~PF_SDA; *pFIO0_INEN |= PF_SDA; SSYNC(); } while (0)
-#define I2C_READ ((*pFIO0_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
- do { \
- if (bit) \
- *pFIO0_FLAG_S = PF_SDA; \
- else \
- *pFIO0_FLAG_C = PF_SDA; \
- SSYNC(); \
- } while (0)
-#define I2C_SCL(bit) \
- do { \
- if (bit) \
- *pFIO0_FLAG_S = PF_SCL; \
- else \
- *pFIO0_FLAG_C = PF_SCL; \
- SSYNC(); \
- } while (0)
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
-#endif
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
/*
*/
#include <configs/bfin_adi_common.h>
-#include <asm/blackfin-config-post.h>
-
-#endif /* __CONFIG_IBF_DSP561__H__ */
+#endif