Support for redundant environment in NAND Flash.

[oweals/u-boot.git] / include / configs / hymod.h

diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index dc7de4461d4032192fe1db0ec4cd842c29d3b9c7..8cad98dbd29d9a217f91a7c0d931c3526e5b0070 100644 (file)
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -35,6 +35,9 @@
 
 #define CONFIG_MPC8260         1       /* This is an MPC8260 CPU       */
 #define CONFIG_HYMOD           1       /* ...on a Hymod board          */
+#define CONFIG_CPM2            1       /* Has a CPM2 */
+
+#define        CONFIG_MISC_INIT_F      1       /* Use misc_init_f()            */
 
 #define CONFIG_BOARD_POSTCLK_INIT      /* have board_postclk_init() function */
 
@@ -174,7 +177,9 @@
 #define CONFIG_COMMANDS                (CFG_CMD_ALL & ~( \
                                        CFG_CMD_BEDBUG  | \
                                        CFG_CMD_BMP     | \
+                                       CFG_CMD_DISPLAY | \
                                        CFG_CMD_DOC     | \
+                                       CFG_CMD_EXT2    | \
                                        CFG_CMD_FDC     | \
                                        CFG_CMD_FDOS    | \
                                        CFG_CMD_FPGA    | \
@@ -186,9 +191,12 @@
                                        CFG_CMD_PCMCIA  | \
                                        CFG_CMD_PCI     | \
                                        CFG_CMD_USB     | \
+                                       CFG_CMD_REISER  | \
                                        CFG_CMD_SCSI    | \
                                        CFG_CMD_SPI     | \
-                                       CFG_CMD_VFD     ) )
+                                       CFG_CMD_UNIVERSE| \
+                                       CFG_CMD_VFD     | \
+                                       CFG_CMD_XIMG    ) )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -219,7 +227,7 @@
 #define        CONFIG_KGDB_EXTC_RATE   3686400 /* serial ext clk rate in Hz */
 #define        CONFIG_KGDB_EXTC_PINSEL 0       /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
 # if defined(CONFIG_KGDB_USE_EXTC)
-#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port at */
+#define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port at */
 # else
 #define CONFIG_KGDB_BAUDRATE   9600    /* speed to run kgdb serial port at */
 # endif
@@ -384,7 +392,7 @@
 #define CFG_FLASH_WRITE_TOUT   500     /* Flash Write Timeout (in ms)  */
 
 #define        CFG_ENV_IS_IN_FLASH     1
-#define        CFG_ENV_SIZE            0x1000  /* Total Size of Environment Sector */
+#define        CFG_ENV_SIZE            0x40000 /* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE      0x40000 /* see README - env sect real size */
 #define        CFG_ENV_ADDR    (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
 
@@ -705,4 +713,21 @@
 #define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH*/
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV               "nor0"
+#define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET       0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT         ""
+#define MTDPARTS_DEFAULT       ""
+*/
+
 #endif /* __CONFIG_H */