i.MX28: Fix initial stack pointer position

[oweals/u-boot.git] / include / configs / hawkboard.h

diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index 12acb27aef7e4e68d8d8b3374bd469b99e1fb177..085937138798c2f9c132b3c2f0d0b0e5b1aa70f6 100644 (file)
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -35,6 +35,7 @@
 #define CONFIG_ARM926EJS               /* arm926ejs CPU core */
 #define CONFIG_SOC_DA8XX               /* TI DA8xx SoC */
 #define CONFIG_SOC_DA850               /* TI DA850 SoC */
+#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
 #define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ          24000000
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
@@ -43,12 +44,30 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_UART_U_BOOT)
+#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (      \
+       DAVINCI_SYSCFG_SUSPSRC_EMAC |           \
+       DAVINCI_SYSCFG_SUSPSRC_I2C  |           \
+       DAVINCI_SYSCFG_SUSPSRC_SPI1 |           \
+       DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
+       DAVINCI_SYSCFG_SUSPSRC_UART2)
+
+#if defined(CONFIG_UART_U_BOOT)
 #define CONFIG_SYS_TEXT_BASE           0xc1080000
-#else
+#elif !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_TEXT_BASE           0xc1180000
 #endif
 
+/* Spl */
+#define CONFIG_SPL
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_LOAD
+#define CONFIG_SPL_LIBGENERIC_SUPPORT  /* for udelay and __div64_32 for NAND */
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LDSCRIPT            "board/$(BOARDDIR)/u-boot-spl-hawk.lds"
+#define CONFIG_SPL_TEXT_BASE           0xc1080000
+#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
+
 /*
  * Memory Info
  */
@@ -84,9 +103,7 @@
 /*
  * Network & Ethernet Configuration
  */
-#if !defined(CONFIG_NAND_SPL)
 #define CONFIG_DRIVER_TI_EMAC
-#endif
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
@@ -114,7 +131,6 @@
 /* Max number of NAND devices */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE_LIST      { 0x62000000, }
-#define NAND_MAX_CHIPS                 1
 /* Block 0--not used by bootcode */
 #define CONFIG_ENV_OFFSET              0x0
 
@@ -138,11 +154,8 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       10
-#define CONFIG_SYS_NAND_ECCSTEPS       (CONFIG_SYS_NAND_PAGE_SIZE /     \
-                                        CONFIG_SYS_NAND_ECCSIZE)
 #define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES *     \
-                                       CONFIG_SYS_NAND_ECCSTEPS)
+
 #endif /* CONFIG_SYS_USE_NAND */
 
 /*
@@ -189,6 +202,10 @@
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_MEMORY
 
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
+
 #ifdef CONFIG_SYS_USE_NAND
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS