/* Falcon Mode */
#define CONFIG_CMD_SPL
#define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
#include "imx6_spl.h" /* common IMX6 SPL configuration */
#include "mx6_common.h"
+#undef CONFIG_SPL_EXT_SUPPORT
#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
/* Driver Model */
#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM
#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
#define CONFIG_DM_THERMAL
-#define CONFIG_CMD_DM
#endif
-/* GPIO */
-#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_GPIO
-
/* Thermal */
-#define CONFIG_IMX6_THERMAL
+#define CONFIG_IMX_THERMAL
/* Serial */
#define CONFIG_MXC_UART
#ifdef CONFIG_SPI_FLASH
/* SPI */
-#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SPI_FLASH_MTD
#define CONFIG_SPI_FLASH_BAR
- #define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
/* GPIO 3-19 (21248) */
#else
/* Enable NAND support */
-#define CONFIG_CMD_TIME
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#ifdef CONFIG_CMD_NAND
#endif /* CONFIG_SPI_FLASH */
-/* Flattened Image Tree Suport */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
/* I2C Configs */
-#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_I2C_GSC 0
#define CONFIG_I2C_EDID
/* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 1
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
/* Filesystem support */
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_UBIFS
-#define CONFIG_DOS_PARTITION
/*
* SATA Configs
#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
/* Various command support */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
#define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_GSC
#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_FUSE /* eFUSE read/write support */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
/* Ethernet support */
#define CONFIG_FEC_MXC
-#define CONFIG_E1000
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_ARP_TIMEOUT 200UL
/* USB Configs */
-#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_KEYBOARD
-#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
/* USB Mass Storage Gadget */
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
-
-/* Netchip IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER "Gateworks"
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
-/* serial console (ttymxc1,115200) */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "Ventana > "
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
#define CONFIG_HWCONFIG
+#define CONFIG_PREBOOT
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START 0x10000000
/*
* MTD Command for mtdparts
*/
+#define CONFIG_LZO
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#endif
/* Persistent Environment Config */
-#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_ENV_IS_IN_SPI_FLASH
#else
\
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
+ "disk=0\0" \
+ "part=1\0" \
\
"fdt_high=0xffffffff\0" \
"fdt_addr=0x18000000\0" \
"initrd_high=0xffffffff\0" \
+ "fixfdt=" \
+ "fdt addr ${fdt_addr}\0" \
"bootdir=boot\0" \
"loadfdt=" \
"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
+ "run fixfdt; " \
"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
+ "run fixfdt; " \
"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
+ "run fixfdt; " \
"fi\0" \
\
+ "fs=ext4\0" \
"script=6x_bootscript-ventana\0" \
"loadscript=" \
"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
- "source; " \
+ "source ${loadaddr}; " \
"fi\0" \
\
"uimage=uImage\0" \
- "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
+ "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \
"mmc_boot=" \
- "setenv fsload 'ext2load mmc 0:1'; " \
- "mmc dev 0 && mmc rescan && " \
+ "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
+ "mmc dev ${disk} && mmc rescan && " \
"setenv dtype mmc; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/mmcblk0p1 rootfstype=ext4 " \
+ "root=/dev/mmcblk0p1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
"fi\0" \
\
"sata_boot=" \
- "setenv fsload 'ext2load sata 0:1'; sata init && " \
+ "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
+ "sata init && " \
"setenv dtype sata; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=ext4 " \
+ "root=/dev/sda1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
"fi; " \
"fi\0" \
"usb_boot=" \
- "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
+ "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
+ "usb start && usb dev ${disk} && " \
"setenv dtype usb; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=ext4 " \
+ "root=/dev/sda1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
"root=${root} ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"ubifsumount; " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"done"
/* Device Tree Support */
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_LIBFDT
#define CONFIG_FDT_FIXUP_PARTITIONS
-#ifndef CONFIG_SYS_DCACHE_OFF
- #define CONFIG_CMD_CACHE
-#endif
-
#endif /* __CONFIG_H */